WSH实用讲座：第一讲 获取机器的网络属性配置
文章类别：
asp | 发表日期:2008-10-5 20:36:12
原文请到WSH（WHITE的小家）(http://wwwasp.yeah.net )
其实就是读注册表，不过如果能获得机器的IP配置等信息，以后配置IIS时就简单了。下面的脚本读出机器的所有可用IP地
址，子网掩码，却省网关等信息：
代码:
--------------------------------------------------------------------------------
Option Explicit Dim WSHShell Dim sNic, sMan Dim Gateway Dim IPAddress Dim SubnetMask Dim i Dim
sTcpipRegKey Dim bIsDHCP Set WSHShell = CreateObject("WScript.Shell") sNic = WSHShell.RegRead
("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\1\ServiceName") If sTcpipRegKey
<> "Microsoft" And Err.Number = 0 Then sTcpipRegKey = "HKLM\SYSTEM\CurrentControlSet\Services\" & sNic
& "\Parameters\Tcpip\" bIsDHCP = WSHShell.RegRead(sTcpipRegKey & "EnableDHCP") If bIsDHCP Then
Gateway = WSHShell.RegRead(sTcpipRegKey & "DhcpDefaultGateway") IPAddress = WSHShell.RegRead
(sTcpipRegKey & "DhcpIPAddress") SubnetMask = WSHShell.RegRead(sTcpipRegKey & "DhcpSubnetMask")
MsgBox ("DefaultGateway: " & Gateway(0) & Chr(10) & Chr(13) & "IPAddress: " & IPAddress & Chr(10) &
Chr(13) & "SubnetMask: " & SubnetMask) Else Gateway = WSHShell.RegRead(sTcpipRegKey
& "DefaultGateway") IPAddress = WSHShell.RegRead(sTcpipRegKey & "IPAddress") SubnetMask =
WSHShell.RegRead(sTcpipRegKey & "SubnetMask") For i=0 to Ubound(IPAddress)-1 MsgBox
("DefaultGateway: " & Gateway(0) & Chr(10) & Chr(13) & "IPAddress: " & IPAddress(i) & Chr(10) & Chr(13)
& "SubnetMask: " & SubnetMask(i)) Next End If End If
--------------------------------------------------------------------------------
说明：机器的网络配置保存在注册表里，网卡项目下面，所以首先必须知道网卡的名字。然后取注册表数据，IP地址和子网掩
码都是数组形式（其实注册表里保存的是二进制数据，VBSCRIPT帮我们转换了）。在WSH里读注册表非常的简单，具体请看上面的
程序。
QQ：2693987339(点击联系)购买教程光盘
:
