时间、空间性能极优的asp无组件上传类

在解码速度方面，化境 2.0 已经非常高了，但是，它还存在以下两个问题：
1、用Data_5xsoft.Write  Request.BinaryRead(Request.TotalBytes)一次读取全部数据，以及用RequestData =Data_5xsoft.Read 一次取出全部数据，在上传数据过大时，会由于内存不足，导致上传失败，这里应该采用分段读取方式。
2、保存数据时，需要先从Data_5xsoft中复制到一个临时流中，在保存大文件时，需要两倍的存储资源，在单机状态下测试，可以发现保存时间随文件尺寸急剧增长，甚至超过上传和解码时间。

本人所写的这个类，采用在解码的过程中，逐块读取（注意：块的大小与速度不成正比，单机测试表明，64K的块比1M的块快得多）的方法，解决问题1，同时采用对普通数据，写入工作流；对文件内容，直接写入文件自身的流的方式，解决问题2。

代码如下，用法类似于化境:

Server.ScriptTimeOut = 600

Class QuickUpload
 Private FForm, FFile, Upload_Stream, ConvertStream
 
 property get Form
  set Form = FForm
 end property
 
 property get File
  set File = FFile
 end property
 
 Private Sub Class_Initialize
  dim iStart, iEnd, boundary, FieldName, FileName, ContentType, ItemValue, theFile, LineEnd
 
  set FForm=CreateObject("Scripting.Dictionary")
  set FFile=CreateObject("Scripting.Dictionary")
  set Upload_Stream=CreateObject("Adodb.Stream")
  Upload_Stream.mode=3
  Upload_Stream.type=1
  Upload_Stream.open
  set ConvertStream = Server.CreateObject("adodb.stream")
  ConvertStream.Mode =3
  ConvertStream.Charset="GB2312"
 
  if Request.TotalBytes<1 then Exit Sub
   
  'dStart = CDbl(Time)
 
  '查找第一个边界
  iStart = Search(Upload_Stream, ChrB(13)&ChrB(10), 1)
  '取边界串
  boundary = subString(1, iStart-1, false)
  '不是结束边界,则循环
  do while StrComp(subString(iStart, 2, false),ChrB(13)&ChrB(10))=0
   iStart = iStart+2
   '取表单项信息头
   do while true
    iEnd = Search(Upload_Stream, ChrB(13)&ChrB(10), iStart)
    '分解信息头
    line = subString(iStart, iEnd-iStart, true)
    '移动位置
    iStart = iEnd+2
    if Line="" then Exit do
    pos = instr(line,":")
    if pos>0 then
     if StrComp(left(Line,pos-1),"Content-Disposition",1)=0 then
      '取表单项名称
      FieldName = ExtractValue(Line,pos+1,"name")
      '取文件名称
      FileName = ExtractValue(Line,pos+1,"filename")
      '删除文件路径
      FileName = Mid(FileName,InStrRev(FileName, "\")+1)
     elseif StrComp(left(Line,pos-1),"Content-Type",1)=0 then
      '取文件类型
      ContentType = trim(mid(Line,pos+1))
     end if
    end if
   loop
   '取表单项内容
   if FileName<>"" then
    '新建文件内容
    set theFile = new FileInfo
    theFile.Init FileName, ContentType
    '文件流内容移到文件流中
    MoveData Upload_Stream, theFile.Stream, iStart
    '上传数据直接传入文件流，可以减少文件存储时间
    iEnd = Search(theFile.Stream, boundary, 1)
    '后继数据移入工作流
    MoveData theFile.Stream, Upload_Stream, iEnd-2
    '
    FFile.add FieldName, theFile
    '移动位置
    iStart = iStart+2+LenB(boundary)
   else
    '查找边界
    iEnd = Search(Upload_Stream, boundary, iStart)
    '取表单项内容
    ItemValue = subString(iStart, iEnd-2-iStart, true)
    '
    if FForm.Exists(FieldName) then
     FForm.Item(FieldName) = FForm.Item(FieldName) & "," & ItemValue
    else
     FForm.Add FieldName, ItemValue
    end if
    '移动位置
    iStart = iEnd+LenB(boundary)
   end if
  loop
  'Response.Write "parse time:" & FormatNumber((CDbl(Time)-dStart)*24*60*60,-1,-1) & "<br>"
 End Sub

 Private Function Search(src, str, theStart)
  iStart = theStart
  pos=0
  do while pos=0
   '长度不够，读一块
   if src.Size<(iStart+lenb(str)-1) then ReadChunk src
   '取一段数据，约64K，可以减少内存需求
   src.Position = iStart-1
   buf = src.Read
   '检测边界
   pos=InStrB(buf,str)
   '如果未找到,向后移动
   if pos=0 then iStart = iStart+LenB(buf)-LenB(str)+1
  loop
  Search = iStart+pos-1
 End function
 
 private sub MoveData(Src, Dest, theStart)
  Src.Position = theStart-1
  Dest.Position = Dest.Size
  Src.CopyTo dest
  Src.Position = theStart-1
  Src.SetEOS
 end sub
 
 private function ExtractValue(line,pos,name)
  dim t, p
  ExtractValue = ""
  t = name + "="""
  p = instr(pos,line,t)
  if p>0 then
   n1 = p+len(t)
   n2 = instr(n1,line,"""")
   if n2>n1 then ExtractValue = mid(line,n1,n2-n1)
  end if
 end function

 Private Function subString(theStart,theLen, ConvertToUnicode)
  if theLen>0 then
   '当长度不够时，读一块数据
   if Upload_Stream.Size<theStart+theLen-1 then ReadChunk Upload_Stream
   Upload_Stream.Position=theStart-1
   Binary =Upload_Stream.Read(theLen)
   if ConvertToUnicode then
    ConvertStream.Type = 1
    ConvertStream.Open
    ConvertStream.Write Binary
    ConvertStream.Position = 0
    ConvertStream.Type = 2
    subString = ConvertStream.ReadText
    ConvertStream.Close
   else
    subString = midB(Binary,1)
   end if
  else
   subString = ""
  end if
 End function
 
 Private Sub ReadChunk(src)
  '读一块，通过一次读64K，可以防止数据量过大时内存溢出
  if Response.IsClientConnected = false then Raise "网络连接中断"
  BytesRead = 65536
  src.Position = src.Size
  src.Write Request.BinaryRead(BytesRead)
  End Sub
 
 '异常信息
 Private Sub Raise(Message)
 Err.Raise vbObjectError, "QuickUpload", Message
 End Sub

 Private Sub Class_Terminate 
    form.RemoveAll
    file.RemoveAll
    set form=nothing
    set file=nothing
    Upload_Stream.close
    set Upload_Stream=nothing
  ConvertStream.Close
  set ConvertStream=nothing
 
 End Sub

End Class

Class FileInfo
   Private FFileName, FFileType, FFileStart, FFileSize, FStream
 
 property get FileName
  FileName = FFileName
 end property
 
 property get FileType
  FileType = FFileType
 end property
 
 property get FileSize
  FileSize = FStream.Size
 end property
 
 property get Stream
  set Stream = FStream
 end property
 
   Public Sub Init(AFileName, AFileType)
     FFileName = AFileName
  FFileType = AFileType
   End Sub
 
 Public function SaveAs(FullPath)
     dim dr,ErrorChar,i
  'dStart = CDbl(Time)
     SaveAs=1
     if trim(fullpath)="" or right(fullpath,1)="/" then exit function
     On Error Resume Next
     FStream.SaveToFile FullPath,2
  if Err.Number>0 then Response.Write "保存数据出错：" & Err.Description & "<br>"
     SaveAs=0
  'Response.Write "save time:" & FormatNumber((CDbl(Time)-dStart)*24*60*60,-1,-1) & "<br>"
   end function
  
 Private Sub Class_Initialize
  set FStream=CreateObject("Adodb.Stream")
  FStream.mode=3
  FStream.type=1
  FStream.open
 end sub
 
 Private Sub Class_Terminate 
     FStream.Close
     set FStream=nothing
 end sub
End Class