用ASP实现号码转换
文章类别：asp | 发表日期:2008-10-5 20:55:43
<%
'***** BEGIN FUNCTION AREA *****
' Formats a given 10 digit number into a nice looking phone number
' Example: given strNumber of 8005551212 you get (800) 555-1212
Function FormatPhoneNumber(strNumber)
Dim strInput ' String to hold our entered number
Dim strTemp ' Temporary string to hold our working text
Dim strCurrentChar ' Var for storing each character for eval.
Dim I ' Looping var
' Uppercase all characters for consistency
strInput = UCase(strNumber)
' To be able to handle some pretty bad formatting we strip out
' all characters except for chars A to Z and digits 0 to 9
' before proceeding. I left in the chars for stupid slogan
' numbers like 1-800-GET-CASH etc...
For I = 1 To Len(strInput)
strCurrentChar = Mid(strInput, I, 1)
' Numbers (0 to 9)
If Asc("0") <= Asc(strCurrentChar) And Asc(strCurrentChar) <= Asc("9") Then
strTemp = strTemp & strCurrentChar
End If
' Upper Case Chars (A to Z)
If Asc("A") <= Asc(strCurrentChar) And Asc(strCurrentChar) <= Asc("Z") Then
strTemp = strTemp & strCurrentChar
End If
Next 'I
' Swap strTemp back to strInput for next set of validation
' I also clear strTemp just for good measure!
strInput = strTemp
strTemp = ""
' Remove leading 1 if applicable
If Len(strInput) = 11 And Left(strInput, 1) = "1" Then
strInput = Right(strInput, 10)
End If
' Error catch to make sure strInput is proper length now that
' we've finished manipulating it.
If Not Len(strInput) = 10 Then
' Handle errors as you see fit. This script raises a real
' error so you can handle it like any other runtime error,
' but you could also pass an error back via the function's
' return value or just display a message... your choice!
Err.Raise 1, "FormatPhoneNumber function", _
"The phone number to be formatted must be a valid 10 digit US phone number!"
' Two alternative error techniques!
'Response.Write "<B>The phone number to be formatted must be a valid phone number!</B>"
'Response.End
' Note if you use this you'll also need to check for
' this below so you don't overwrite it!
'strTemp = "<B>The phone number to be formatted must be a valid phone number!</B>"
End If
' If an error occurred then the rest of this won't get processed!
' Build the output string formatted to our liking!
' (xxx) xxx-xxxx
strTemp = "(" ' "("
strTemp = strTemp & Left(strInput, 3) ' Area code
strTemp = strTemp & ") " ' ") "
strTemp = strTemp & Mid(strInput, 4, 3) ' Exchange
strTemp = strTemp & "-" ' "-"
strTemp = strTemp & Right(strInput, 4) ' 4 digit part
' Set return value
FormatPhoneNumber = strTemp
End Function
'***** END FUNCTION AREA *****
%>
<%' Runtime Code
Dim strNumberToFormat ' The phone number we pass to the function
' Retrieve the requested number or set it to the default
If Request.QueryString("phone_number") <> "" Then
strNumberToFormat = Request.QueryString("phone_number")
Else
strNumberToFormat = "1-800-555-1212"
End If
' We need to turn this on if we want to trap errors.
' Otherwise the script would generate an error if the input
' number wasn't correct.
On Error Resume Next
%>
<TABLE BORDER="1">
<TR>
<TD>Phone number before formatting:</TD>
<TD><%= strNumberToFormat %></TD>
</TR>
<TR>
<TD>Phone number after formatting:</TD>
<TD>
<%
' Call the function and output the results
Response.Write FormatPhoneNumber(strNumberToFormat)
' Check for an error and display the message if one occurred
If Err.number Then Response.Write Err.description
%>
</TD>
</TR>
</TABLE>
<FORM ACTION="39.asp" METHOD="get">
Phone number to format: <INPUT TYPE="text" NAME="phone_number" VALUE="<%= strNumberToFormat %>">
<INPUT type="submit" value="Submit">
</FORM>
'***** BEGIN FUNCTION AREA *****
' Formats a given 10 digit number into a nice looking phone number
' Example: given strNumber of 8005551212 you get (800) 555-1212
Function FormatPhoneNumber(strNumber)
Dim strInput ' String to hold our entered number
Dim strTemp ' Temporary string to hold our working text
Dim strCurrentChar ' Var for storing each character for eval.
Dim I ' Looping var
' Uppercase all characters for consistency
strInput = UCase(strNumber)
' To be able to handle some pretty bad formatting we strip out
' all characters except for chars A to Z and digits 0 to 9
' before proceeding. I left in the chars for stupid slogan
' numbers like 1-800-GET-CASH etc...
For I = 1 To Len(strInput)
strCurrentChar = Mid(strInput, I, 1)
' Numbers (0 to 9)
If Asc("0") <= Asc(strCurrentChar) And Asc(strCurrentChar) <= Asc("9") Then
strTemp = strTemp & strCurrentChar
End If
' Upper Case Chars (A to Z)
If Asc("A") <= Asc(strCurrentChar) And Asc(strCurrentChar) <= Asc("Z") Then
strTemp = strTemp & strCurrentChar
End If
Next 'I
' Swap strTemp back to strInput for next set of validation
' I also clear strTemp just for good measure!
strInput = strTemp
strTemp = ""
' Remove leading 1 if applicable
If Len(strInput) = 11 And Left(strInput, 1) = "1" Then
strInput = Right(strInput, 10)
End If
' Error catch to make sure strInput is proper length now that
' we've finished manipulating it.
If Not Len(strInput) = 10 Then
' Handle errors as you see fit. This script raises a real
' error so you can handle it like any other runtime error,
' but you could also pass an error back via the function's
' return value or just display a message... your choice!
Err.Raise 1, "FormatPhoneNumber function", _
"The phone number to be formatted must be a valid 10 digit US phone number!"
' Two alternative error techniques!
'Response.Write "<B>The phone number to be formatted must be a valid phone number!</B>"
'Response.End
' Note if you use this you'll also need to check for
' this below so you don't overwrite it!
'strTemp = "<B>The phone number to be formatted must be a valid phone number!</B>"
End If
' If an error occurred then the rest of this won't get processed!
' Build the output string formatted to our liking!
' (xxx) xxx-xxxx
strTemp = "(" ' "("
strTemp = strTemp & Left(strInput, 3) ' Area code
strTemp = strTemp & ") " ' ") "
strTemp = strTemp & Mid(strInput, 4, 3) ' Exchange
strTemp = strTemp & "-" ' "-"
strTemp = strTemp & Right(strInput, 4) ' 4 digit part
' Set return value
FormatPhoneNumber = strTemp
End Function
'***** END FUNCTION AREA *****
%>
<%' Runtime Code
Dim strNumberToFormat ' The phone number we pass to the function
' Retrieve the requested number or set it to the default
If Request.QueryString("phone_number") <> "" Then
strNumberToFormat = Request.QueryString("phone_number")
Else
strNumberToFormat = "1-800-555-1212"
End If
' We need to turn this on if we want to trap errors.
' Otherwise the script would generate an error if the input
' number wasn't correct.
On Error Resume Next
%>
<TABLE BORDER="1">
<TR>
<TD>Phone number before formatting:</TD>
<TD><%= strNumberToFormat %></TD>
</TR>
<TR>
<TD>Phone number after formatting:</TD>
<TD>
<%
' Call the function and output the results
Response.Write FormatPhoneNumber(strNumberToFormat)
' Check for an error and display the message if one occurred
If Err.number Then Response.Write Err.description
%>
</TD>
</TR>
</TABLE>
<FORM ACTION="39.asp" METHOD="get">
Phone number to format: <INPUT TYPE="text" NAME="phone_number" VALUE="<%= strNumberToFormat %>">
<INPUT type="submit" value="Submit">
</FORM>
