VC 技巧 For 新手_VC技术_C语言教程

//cb 调用存储过程
/*   declare @userid varchar(32)
declare @fee numeric(8,2)
declare @manage varchar(32)
declare @type numeric(2,0)
declare @status numeric(1,0)
set @userid = '20048888'
set @fee = 1.11
set @type = 1
set @manage = 'manage'
exec sp_pay_for_thirdparty @userid,@fee,@manage,@type,@status output
print @status
*/

   ADOStoredProc1->Close();
   ADOStoredProc1->Parameters->Items[1]->Value = "20048888";
   ADOStoredProc1->Parameters->Items[2]->Value = "1.15";
   ADOStoredProc1->Parameters->Items[3]->Value = "manage";
   ADOStoredProc1->Parameters->Items[4]->Value = 1;
   ADOStoredProc1->ExecProc();
   int i = ADOStoredProc1->Parameters->Items[5]->Value;
   ShowMessage(i);
/***************************/
 /*     ShowMessage(ConnStr);
/*VC Studio 使用技巧大全 2.0版本
源代码和技术资料站点
http://www.vchelp.net/ gb
http://www.csdn.net/ gb
http://www.codeguru.com/ en
http://www.codetools.com/ en
http://www.dexv.com/ en
msdn.microsoft.com en
http://www.programmerheaven.com/ en
http://www.freshmeat.net/ en
http://www.sourceforge.net/ en
www-900.ibm.com/developerWorks/ gb
论坛和标准，组织
http://www.linuxaid.com.cn/ gb
http://www.linuxbyte.com/ gb
http://www.aka.org.cn/ gb
http://www.rfc.org/ en gb

/*///////////////////////////////////////////
*1。在工具条下加汉字
*////////////////////////////////////////////
 m_wndToolBar.SetButtonText(11," 启动 ");
 m_wndToolBar.SetButtonText(12," 停止 ");
 CRect rc(0, 0, 0, 0);
 CSize sizeMax(0, 0);
 CToolBarCtrl& bar = m_wndToolBar.GetToolBarCtrl();
 for (int nIndex = bar.GetButtonCount() - 1; nIndex >= 0; nIndex--)
 {
  bar.GetItemRect(nIndex, rc);
  rc.NormalizeRect();
  sizeMax.cx = __max(rc.Size().cx, sizeMax.cx);
  sizeMax.cy = __max(rc.Size().cy, sizeMax.cy);
 }
 //sizeMax.cx += 10;
 m_wndToolBar.SetSizes(sizeMax, CSize(16,15));
/*///////////////////////////////////////////
*2。删除非空目录
*////////////////////////////////////////////
 SHFILEOPSTRUCT shfileop;
 shfileop.hwnd = NULL;
 shfileop.wFunc = FO_DELETE ;
 shfileop.fFlags = FOF_SILENT | FOF_NOCONFIRMATION  ;
 shfileop.pFrom = "c:\\test";
 shfileop.pTo = "";
 shfileop.lpszProgressTitle = "";
 shfileop.fAnyOperationsAborted = TRUE;
 int nOK = SHFileOperation(&shfileop);
/////////////////////////////////////////////  
/*///////////////////////////////////////////
*3。字符串转整型值
*////////////////////////////////////////////
 CString str = "a1b2c3d4";
 unsigned long i;
 sscanf(str,"%x",&i);
/*///////////////////////////////////////////
*4。弹出数字
*////////////////////////////////////////////
void Tanchu(int i)
{
 CString str="";
 str.Format("%d",i);
 AfxMessageBox(str);
}
/*///////////////////////////////////////////
*5。不让界面死掉
*////////////////////////////////////////////
void DoMessageLoop()
{
 MSG msg;
 while(PeekMessage(&msg,NULL,0,0,PM_REMOVE))
 {
  DispatchMessage(&msg);
  TranslateMessage(&msg);
 }
}
/*///////////////////////////////////////////
*6。弹出无符号数组内容
*////////////////////////////////////////////
void ShowML(unsigned char *buf1,int i)
{
 unsigned char *buf=buf1;
 CString str="",str1="";
  for (int j=0;j<i;j++)
  {
   str.Format("%02x ",*(buf+j));
   str1=str1+str;
  }
  AfxMessageBox(str1);
}
/*///////////////////////////////////////////
*7。鼠标移到ICO上，变图标 ICO ID为IDC_ABOUT
*////////////////////////////////////////////
BOOL CDemoCeshiDlg::PreTranslateMessage(MSG* pMsg)
{
 // TODO: Add your specialized code here and/or call the base class
 if(pMsg->message==WM_MOUSEMOVE && pMsg->hwnd==m_myhelp.GetSafeHwnd())
 {
  SetCursor(AfxGetApp()->LoadStandardCursor(MAK EINTRESOURCE(IDC_HELP)));
 }
 return CDialog::PreTranslateMessage(pMsg);
}
/*///////////////////////////////////////////
*8。设置对话框的颜色
*////////////////////////////////////////////
SetDialogBkColor(RGB (131,177,210), RGB(0,0,255));
/*///////////////////////////////////////////
*9。在RichEdit中显示字符串
*////////////////////////////////////////////
void CRichEdDlg::Message(CRichEditCtrl *rich,LPCTSTR lpszMessage,COLORREF clr)
{
// if(!GetDocument()->allowshow) return;
 CHARFORMAT cf;
 cf.cbSize = sizeof(CHARFORMAT);
 cf.dwMask = CFM_COLOR | CFM_FACE | CFM_SIZE | CFM_BOLD | CFM_ITALIC | CFM_UNDERLINE;
// m_rich.GetSelectionCharFormat(cf);
 if (cf.dwEffects & CFE_AUTOCOLOR) cf.dwEffects -= CFE_AUTOCOLOR;
 // Get a color from the common color dialog.
  cf.crTextColor = clr;
 cf.dwMask = CFM_COLOR;
 rich->SetSelectionCharFormat(cf);
 rich->ReplaceSel(lpszMessage);
 //UnlockWindowUpdate();
}
/*///////////////////////////////////////////
*10。ADO中空值的处理，
*////////////////////////////////////////////
_variant_t var;
CString temp;
_bstr_t bstr;
var = m_pRS->GetCollect("字段1");
or
m_rs->Fields->Item["avg"]->Value;
or i 从0开始
m_rs->Fields->Item[(long)i]->Value;
if(var.vt != NULL)
{
 bstr=variant_inp;
 temp.Format("%s",(LPCTSTR)(_bstr_t)bstr);
}
/*///////////////////////////////////////////
*11。ADO的连接字符串，
*////////////////////////////////////////////
_bstr_t strConnect="Provider=SQLOLEDB;Server=202.116.3.27;Database=d atabase_name; uid=user_name; pwd=password";
/*///////////////////////////////////////////
*12。放置文本数据到粘贴板
*////////////////////////////////////////////
 UpdateData(1);
 HGLOBAL HMem;
 char *pMem;
 HMem = (char*)::GlobalAlloc(GMEM_MOVEABLE|GMEM_DDESHARE,m_1.GetLeng th()+1);
 if (HMem == NULL)
  return;
 pMem=(char*)::GlobalLock(HMem);
 if (pMem == NULL)
 {
  ::GlobalFree(HMem);
  return;
 }
 ::lstrcpy(pMem,m_1);
 ::GlobalUnlock(HMem);
 if (!OpenClipboard())
 {
  ::GlobalFree(HMem);
  return;
 }
 ::EmptyClipboard();
 ::SetClipboardData(CF_TEXT,HMem);
 HMem=0;
 ::CloseClipboard();
/*///////////////////////////////////////////
*13。从粘贴板读文本数据到字符串
*////////////////////////////////////////////
 if (!IsClipboardFormatAvailable(CF_TEXT))
  return ;
 if (!OpenClipboard())
  return ;
  char *lptstr = new char[1024] ;
 
 HGLOBAL hglb = GetClipboardData(CF_TEXT);
 if (hglb != NULL)
 {
  memset(lptstr,0,1024);
  lptstr = (char *)GlobalLock(hglb);
  if (lptstr != NULL)
  {
   GlobalUnlock(hglb);
  }
 }
 CloseClipboard();
 m_2 += lptstr ;
 UpdateData(0);
/*///////////////////////////////////////////
*14。得到选择目录
*////////////////////////////////////////////
 CString str;
 BROWSEINFO bi;
 char name[MAX_PATH];
 ZeroMemory(&bi,sizeof(BROWSEINFO));
 bi.hwndOwner=GetSafeHwnd();
 bi.pszDisplayName=name;
 bi.lpszTitle="Select folder";
 bi.ulFlags=BIF_RETURNONLYFSDIRS;
 LPITEMIDLIST idl=SHBrowseForFolder(&bi);
 if(idl==NULL)
  return;
 SHGetPathFromIDList(idl,str.GetBuffer(MAX_PATH));
 MessageBox(str);
/*///////////////////////////////////////////
*15。保存当前屏幕到Bmp文件
*////////////////////////////////////////////
void SaveBmp()
{
 CDC dc;
 dc.CreateDC("DISPLAY",NULL,NULL,NULL);
 CBitmap bm;
 int Width=GetSystemMetrics(SM_CXSCREEN);
 int Height=GetSystemMetrics(SM_CYSCREEN);
 bm.CreateCompatibleBitmap(&dc,Width,Height);
 CDC tdc;
 tdc.CreateCompatibleDC(&dc);
 CBitmap*pOld=tdc.SelectObject(&bm);
 tdc.BitBlt(0,0,Width,Height,&dc,0,0,SRCCOPY);
 tdc.SelectObject(pOld);
 BITMAP btm;
 bm.GetBitmap(&btm);
 DWORD size=btm.bmWidthBytes*btm.bmHeight;
 LPSTR lpData=(LPSTR)GlobalAllocPtr(GPTR,size);
/////////////////////////////////////////////
 BITMAPINFOHEADER bih;
 bih.biBitCount=btm.bmBitsPixel;
 bih.biClrImportant=0;
 bih.biClrUsed=0;
 bih.biCompression=0;
 bih.biHeight=btm.bmHeight;
 bih.biPlanes=1;
 bih.biSize=sizeof(BITMAPINFOHEADER);
 bih.biSizeImage=size;
 bih.biWidth=btm.bmWidth;
 bih.biXPelsPerMeter=0;
 bih.biYPelsPerMeter=0;
///////////////////////////////////
 GetDIBits(dc,bm,0,bih.biHeight,lpData,(BITMAPINFO*)&bih,DIB_RGB_COLORS);
// bm.GetBitmapBits(size,lpData); //此函数在处理5-5-5模式的16位色下会出现颜色混乱
//////////////////////////////
 static int filecount=0;
 CString name;
 name.Format("pict%04d.bmp",filecount++);
 name=m_Path+name;
 BITMAPFILEHEADER bfh;
 bfh.bfReserved1=bfh.bfReserved2=0;
 bfh.bfType=((WORD)('M'<< 8)|'B');
 bfh.bfSize=54+size;
 bfh.bfOffBits=54;
 CFile bf;
 if(bf.Open(name,CFile::modeCreate|CFile::modeWrite)){
  bf.WriteHuge(&bfh,sizeof(BITMAPFILEHEADER));
  bf.WriteHuge(&bih,sizeof(BITMAPINFOHEADER));
  bf.WriteHuge(lpData,size);
  bf.Close();
  nCount++;
 }
 GlobalFreePtr(lpData);
 if(nCount==1)
  m_Number.Format("%d picture captured.",nCount);
 else
  m_Number.Format("%d pictures captured.",nCount);
 UpdateData(FALSE);
}
/*///////////////////////////////////////////
*16。选取文件名。
*////////////////////////////////////////////
 第一个参数为true 是打开对话框 .为False 是保存对话框
 CFileDialog fileDlg(true,NULL,NULL,NULL,"授权文件 (*.B*)|*.B*||");
 CFileDialog fileDlg(true,NULL,"a.bat",NULL,"授权文件 (*.B*)|*.B*||");
 if(fileDlg.DoModal()!=IDOK)
  return;
 m_filename = fileDlg.GetPathName();
/*///////////////////////////////////////////
*17。文件不存在则创建，存在则覆盖。
*////////////////////////////////////////////
 CFile f;
 if(!f.Open(sfile,CFile::modeReadWrite|CFile::modeNoTru ncate|CFile::typeBinary|CFile::modeCreate))
 {
  AfxMessageBox("不能打开出错");
  return;
 }
/*///////////////////////////////////////////
*18。屏蔽esc 回车键
*////////////////////////////////////////////
BOOL CCaptureDlg::PreTranslateMessage(MSG* pMsg)
{
    if(pMsg -> message == WM_KEYDOWN)
 {
        if(pMsg -> wParam == VK_ESCAPE)
   return TRUE;
  if(pMsg -> wParam == VK_RETURN)
   return TRUE;
 }
 return CDialog::PreTranslateMessage(pMsg);
}
/*///////////////////////////////////////////
*19。格式化读取一行文本中的内容
*////////////////////////////////////////////
/*/文件中的内容：//////////////
a23456天|123|234|345|哈尔滨|太平|
a27456天|123|34|35|哈尔滨|太平|
*////////////////////////////
 CFileDialog fileDlg(true,NULL,NULL,NULL,"文本文件 (*.txt)|*.txt||");
 if(fileDlg.DoModal()!=IDOK)
  return;
 CString filename = fileDlg.GetPathName();
 CStdioFile f;
 CString s;
 f.Open(filename,CFile::modeRead);
 f.ReadString(s);
 int a1,a2,a3;
 char c1[20],c2[20],c3[20];
 memset(c1,0,20);
 memset(c2,0,20);
 memset(c3,0,20);
 int nRet = sscanf( s, "%[^|]|%d|%d|%d|%[^|]|%[^|]|\n", c1 , &a1 , &a2 , &a3 , c2 , c3 );
 f.Close();
/*///////////////////////////////////////////
*20。设置字体
*////////////////////////////////////////////
 LOGFONT m_logFont;
 memset(&m_logFont,0,sizeof(LOGFONT));
 m_logFont.lfHeight=15;
 m_logFont.lfWeight=FW_NORMAL;
 m_logFont.lfCharSet=134;
 m_logFont.lfOutPrecision=OUT_DEFAULT_PRECIS;
 m_logFont.lfClipPrecision=CLIP_DEFAULT_PRECIS;
 m_logFont.lfQuality=PROOF_QUALITY;
 m_logFont.lfPitchAndFamily=FIXED_PITCH;
 strcpy(m_logFont.lfFaceName,"宋体");
 CFont font;
 font.CreateFontIndirect(&m_logFont);
 m_blist.SetFont(&font);
 font.DeleteObject();
//－－－－－－－－－－－－－－－－－－－－－－－－
 //从字体对话框中选中字体
 LOGFONT lgft;
 CFontDialog fd;
 CFont m_font;
 if(fd.DoModal()==IDOK)
 {
  fd.GetCurrentFont(&lgft);
  m_font.DeleteObject();
  m_font.CreateFontIndirect(&lgft);
  m_11.SetFont(&m_font);
 }
/*///////////////////////////////////////////
*21。读取INI文件
*////////////////////////////////////////////
 char IniFile[1024] = ".\\TEL.INI";//INI文件名,必须是全路径
 int a = 10;
 a = GetPrivateProfileInt( "ST_TONE" , "ON_TIME" ,  a ,  IniFile );
 Tanchu(a);
/*///////////////////////////////////////////
*22。用程序创建access Mdb数据库
*////////////////////////////////////////////
  HRESULT hr = S_OK;
 CString strcnn(_T("Provider=Microsoft.JET.OLEDB.4.0;Data source = test.mdb"));
 try
 {
      ADOX::_CatalogPtr m_pCatalog = NULL;
      hr = m_pCatalog.CreateInstance(__uuidof (ADOX::Catalog));
      if(FAILED(hr))
     {
             _com_issue_error(hr);
       }
       else
       {
               m_pCatalog->Create(_bstr_t(strcnn)); //Create MDB
       }
 } 
 catch(_com_error &e)
 {
     AfxMessageBox(_T("error"));
 }
/*///////////////////////////////////////////
*23。连接ACCess Mdb 数据库
*////////////////////////////////////////////
_ConnectionPtr g_pConn;
 g_pConn.CreateInstance(__uuidof(Connection));
 g_pConn->Open("Provider=Microsoft.Jet.OLEDB.4.0;Dat a Source=d:\\test.mdb;",
  "", "", adConnectUnspecified);
程序退出时,g_pConn->Close();
::CoUninitialize();
/*///////////////////////////////////////////
*24。读取binary数据（variant to byte)
*////////////////////////////////////////////
 _CommandPtr m_cmdCard,m_cmdWater;

 m_cmdCard.CreateInstance(__uuidof(Command));
 m_cmdCard->ActiveConnection=m_ConnCard;
 _RecordsetPtr trd;
 m_cmdCard->CommandText = "select * from tabidenti";
 trd = m_cmdCard->Execute(NULL,NULL,adCmdText);
 _variant_t var1;
 CString s,s1;
 _bstr_t bstr1;
 if(trd->GetCollect("Fees").vt == VT_NULL)
 {
  MessageBox("为空");
 }
 var1 = trd->GetCollect("Fees");

 COleSafeArray safeArray_inp;
 long len,k;
 BYTE rxdata[2048];
 safeArray_inp = var1;
 len = safeArray_inp.GetOneDimSize();
 for(k = 0 ;k<len;k++)
 {
  safeArray_inp.GetElement(&k,rxdata+k);
 }
 for(k = 0;k<len;k++)
 {
  BYTE by = *(char*)(rxdata+k);
  s.Format("%02x",by);
  s1+=s;
 }
 MessageBox(s1);
 return;
/*///////////////////////////////////////////
*25。得到路径名，不要文件名
*////////////////////////////////////////////
 CString str = "c:\\1\\2\\a.bat";
 str.MakeReverse();
 int iiii = str.Find('\\');
 str = str.Right(str.GetLength() - iiii);
 str.MakeReverse();
 MessageBox(str);
  return;
/*///////////////////////////////////////////
*26。取得数据库中bigint 数据 到__int64 中
*////////////////////////////////////////////
 _variant_t var = pRcs->GetCollect((LONG)0);
 CString str;
 _bstr_t bstr=var;
 str.Format("%s",(LPCTSTR)(_bstr_t)bstr);
 MessageBox(str);
 __int64 tint64 ;
 tint64 = _atoi64(str);
/*///////////////////////////////////////////
*27。动态调用DLL
*////////////////////////////////////////////
 typedef int(_cdecl *Connect)(int i);
 HINSTANCE hinstDLL=NULL;
 hinstDLL=LoadLibrary("vcDll.dll");
 if (hinstDLL)
 {
  Connect Proc;
  Proc = (Connect)GetProcAddress (hinstDLL,"Tanchu");
  int iValue = Proc(1234);
  FreeLibrary(hinstDLL);
 
  char * p = new char[10];
  sprintf(p,"%d",iValue);
  AfxMessageBox(p);

 }
 else
 {
  AfxMessageBox("没少到dll");
 }
/*///////////////////////////////////////////
*28。注册OCX控件
*////////////////////////////////////////////
void Regkongjian(LPCTSTR kjName)
{
 // TODO: Add your control notification handler code here
  //ActiveX控件的路径及文件名
  LPCTSTR pszDllName=kjName;
  //装载ActiveX控件
  HINSTANCE hLib = LoadLibrary(pszDllName);
  if (hLib < (HINSTANCE)HINSTANCE_ERROR)
  {
       AfxMessageBox("不能载入OCX文件!");
       return;
  }
  //获取注册函数DllRegisterServer地址
  FARPROC lpDllEntryPoint;
  lpDllEntryPoint = GetProcAddress(hLib,_T("DllRegisterServer"));
  //调用注册函数DllRegisterServer
  if(lpDllEntryPoint!=NULL)
  {
       if(FAILED((*lpDllEntryPoint)()))
       {
             AfxMessageBox("调用DllRegisterServer 失败！");
             FreeLibrary(hLib);
             return;
       }
  //     MessageBox("注册成功","结果",MB_OK);
  }
  else
  AfxMessageBox("调用DllRegisterServer失败！");
}
/*///////////////////////////////////////////
*28。得到表中各列的名字
*////////////////////////////////////////////
 CDatabase mydb;
 CRecordset my(&mydb);
 try
    {
   mydb.OpenEx(_T("DSN=odbcexcel"),CDatabase::openReadOnly |CDatabase::noOdbcDialog);
   my.Open(CRecordset::snapshot, (LPCTSTR)("Select * From [Sheet1$]"));
    }
 catch(...)
    {
  AfxMessageBox("无法打开数据库文件");
  return;
    }

 if(my.IsBOF()) my.MoveFirst();
    while(!my.IsEOF()) my.MoveNext();//空跑一遍,以便取得记录总数
    int nRows=my.GetRecordCount();//取得总行数
    int nCols=my.GetODBCFieldCount();//取得列数
    CStringArray strColTitle;
    CODBCFieldInfo fieldinfo;
    if(strColTitle.GetSize()) strColTitle.RemoveAll();
    for(int i=0;i<nCols;i++)//得到列标题
    {
        my.GetODBCFieldInfo(i,fieldinfo);
        strColTitle.Add(LPCTSTR(fieldinfo.m_strName));
        CString str=strColTitle.GetAt(i);
  MessageBox(str);
    }
//ADO中
 _RecordsetPtr m_recordset1;
 _CommandPtr m_command1;
 m_recordset1.CreateInstance(__uuidof(Recordset));
 m_command1.CreateInstance(__uuidof(Command));
 m_command1->ActiveConnection=m_connection;
 m_command1->CommandText="SELECT * FROM RTU order by reg_time desc";
try
{
 m_recordset1=m_command1->Execute(NULL,NULL,adCmdTex t);
 Fields *fields=NULL;
 HRESULT hr;
 hr=m_recordset1->get_Fields(&fields);
 long iSum;
 if(SUCCEEDED(hr))
  hr=fields->get_Count(&iSum);
 for(long i=0 ;i<iSum;i++)
 {
  BSTR bStr;
  hr=fields->Item->get_Name(&bStr);
  CString str;
  str=bStr;
  AddInfo(str);
 }
}
catch(_com_error e)
{

}
 fields->Release();
 fields = NULL;
/*///////////////////////////////////////////
*28。序列化
*////////////////////////////////////////////
 CStdioFile f1;
 TCHAR str[MAX_PATH];
 GetCurrentDirectory(MAX_PATH,str);
 strcat(str, _T("\\a.txt"));
 f1.Open(str, CFile::modeCreate | CFile::modeWrite );
 CArchive archive(&f1, CArchive::store);
 CString s1 = "a1111bc";//如不定义成变量,编辑不过去.
 archive << s1;
 archive.Close();
 f1.Close();
 f1.Open(str, CFile::modeRead);
 f1.SeekToBegin();
 CArchive archive2(&f1, CArchive::load);
 CString s;
 archive2 >> s;
 archive2.Close();
 f1.Close();
 MessageBox(s);
/*///////////////////////////////////////////
*29。CList 用法
*////////////////////////////////////////////

CList<LPTEST, LPTEST>CTestList;这行去掉typedef 就可以用
CTestList.AddTail(&testl);
不过应该这么赋值吧.
TEST test1;
memcpy(test1.chtest1,"ok",2);
memcpy(test1.chtest2,"no",2);
CTestList.AddTail(&test1);
 
/*///////////////////////////////////////////
*30。调用带参数的程序
*////////////////////////////////////////////

SHELLEXECUTEINFO execinfo;
  memset(&execinfo, 0, sizeof(execinfo));
  execinfo.cbSize = sizeof(execinfo);
  execinfo.lpVerb = "Open";
  execinfo.lpFile ="JzqDb.exe"; //所要执行的外部程序
  execinfo.lpParameters = "SA"; // file://参数
  execinfo.fMask = SEE_MASK_NOCLOSEPROCESS;
  execinfo.nShow = SW_NORMAL; //SW_SHOWDEFAULT;显示窗体类型
//SendMessage(WM_MINIMIZE);
ShowWindow(SW_MINIMIZE);
if (ShellExecuteEx(&execinfo))
 {
  WaitForSingleObject(execinfo.hProcess, INFINITE);
 }
  ShowWindow(SW_NORMAL);

/*///////////////////////////////////////////
*31。导入lib文件
*////////////////////////////////////////////
#pragma comment( lib , "vcDll.lib" )

/*///////////////////////////////////////////
*32。动态调用Dll中的函数
*////////////////////////////////////////////
 typedef void (_cdecl *Connect)(int i);
 HINSTANCE hinstDLL=NULL;
 hinstDLL=LoadLibrary("mfcdll.dll");
 if (hinstDLL)
 {
  Connect Proc;
  Proc = (Connect)GetProcAddress (hinstDLL,"DyDialog");
  if(Proc)
  {
   Proc(11);
  }
  FreeLibrary(hinstDLL);
 }
 else
 {
  AfxMessageBox("没找到dll");
 }
/*///////////////////////////////////////////
*33。考文件
*////////////////////////////////////////////
 if(CopyFile("aa.txt","bb.txt",0))
 MessageBox("cheng gong");
/*///////////////////////////////////////////
*34。排序列表
*////////////////////////////////////////////
struct tagBANK
{
 int BankSn;
 int LocalSn;
};
CList<tagBANK,tagBANK> BankList;
tagBANK *pHead = NULL;
int SortCmp(const void *elem1, const void *elem2 )
{
 tagBANK * p1 = ( tagBANK * ) elem1 ;
 tagBANK * p2 = ( tagBANK * ) elem2 ;

 if( p1->LocalSn > p2->LocalSn ) return 1;
 if( p1->LocalSn == p2->LocalSn ) return 0;
 if( p1->LocalSn < p2->LocalSn ) return -1;

 return 0;
}

//初始化
 BankList.RemoveAll();
 tagBANK Node;
 Node.BankSn = 5;
 BankList.AddTail(Node);
 Node.BankSn = 6;
 BankList.AddTail(Node);
 Node.BankSn = 3;
 BankList.AddTail(Node);
 Node.BankSn = 4;
 BankList.AddTail(Node);
 Node.BankSn = 2;
 BankList.AddTail(Node);
 Node.BankSn = 1;
 BankList.AddTail(Node);

//排序
 tagBANK Node;
 POSITION pos = BankList.GetHeadPosition(),prev;
 while(pos != NULL)
 {
  prev = pos;
  Node = BankList.GetNext(pos);
  Node.LocalSn = Node.BankSn + 10;
  BankList.RemoveAt(prev);
  BankList.InsertBefore(pos,Node);
 }
 if( BankList.GetCount() != 0)
  pHead = (tagBANK * )malloc(sizeof(tagBANK)*BankList.GetCount() );
 pos = BankList.GetHeadPosition(),prev;
 int i =0;
 while(pos != NULL)
 {
  prev = pos;
  Node = BankList.GetNext(pos);
  pHead = Node;
  i++;
 }
 qsort( pHead , BankList.GetCount() , sizeof(tagBANK), SortCmp );

//显示
 tagBANK Node;
 CString str;
 POSITION pos = BankList.GetHeadPosition(),prev;
 int i = 0;
 while(pos != NULL)
 {
  prev = pos;
  Node = BankList.GetNext(pos);
  str.Format("localsn%d--banksn%d",Node.LocalSn,Node.BankSn);  //显示原有内容
  m_list.AddString(str);
  str.Format("localsn%d--banksn%d",pHead.LocalSn,pHead.BankSn);//显示排序后内容
  m_list.AddString(str);
  i++;
 }
 if(pHead != NULL)
  free(pHead);

/*///////////////////////////////////////////
*35。DLL中头文件的定义
*////////////////////////////////////////////
#ifndef  _CONVFUN_H
#define  _CONVFUN_H

#ifndef  DATACONV_EXPORTS
 #define  CONVDLLAPI  __declspec(dllimport)
#else 
 #define  CONVDLLAPI  __declspec(dllexport)
#endif

/*///////////////////////////////////////////
*36。设置显示器分辨率
*////////////////////////////////////////////
void CMainFrame::SetStartMode()//设置显示器分辨率
{
    DEVMODE lpDevMode;
    lpDevMode.dmPelsHeight=768;
    lpDevMode.dmPelsWidth=1024;
    lpDevMode.dmDisplayFrequency=85;
    lpDevMode.dmFields=DM_PELSWIDTH|DM_PELSHEIGHT|DM_DISPLAYFREQ UENCY;
    ChangeDisplaySettings(&lpDevMode,0);
    this->BringWindowToTop();
}

/*///////////////////////////////////////////
*37。备份还原数据库
*////////////////////////////////////////////
 CString str = "backup database 数据库名 to disk = '完全文件名'";
      "restore database 数据库名 from disk = '完全文件名'";

/*///////////////////////////////////////////
*38。设置日期时间控件的范围
*////////////////////////////////////////////
 CTime t = time(NULL);
 CTime t1;
 CTimeSpan tspan(1,0,0,0);
 t1 = t - tspan;
 ((CDateTimeCtrl*)GetDlgItem(IDC_DATETIMEPICKER1))-> SetRange(&t1,&t);
/*///////////////////////////////////////////
*39。列标控件的可编辑状态／／属性设置Edit labels
*////////////////////////////////////////////

void CTmplistctrlDlg::OnEndlabeleditList1(NMHDR* pNMHDR, LRESULT* pResult)
{
 LV_DISPINFO* pDispInfo = (LV_DISPINFO*)pNMHDR;
 // TODO: Add your control notification handler code here
 CString str;
 m_list.GetEditControl()->GetWindowText(str);
 
 m_list.SetItemText(pDispInfo->item.iItem,pDispInfo- >item.iSubItem,str);
 
 *pResult = 0;
}
void CTmplistctrlDlg::OnEdit()
{
 // TODO: Add your control notification handler code here
 POSITION pos = m_list.GetFirstSelectedItemPosition();
 if(pos!=NULL)
 {
  int nItem = m_list.GetNextSelectedItem(pos);
  m_list.SetFocus();
  m_list.EditLabel(nItem);
 }
}
void CTmplistctrlDlg::OnDblclkList1(NMHDR* pNMHDR, LRESULT* pResult)
{
 // TODO: Add your control notification handler code here
 OnEdit();
 *pResult = 0;
}

/*///////////////////////////////////////////
*40。设置工具条的移动图片
*////////////////////////////////////////////

 if (!m_wndToolBar.CreateEx(this, TBSTYLE_FLAT, WS_CHILD | WS_VISIBLE | CBRS_TOP
  | CBRS_GRIPPER | CBRS_TOOLTIPS | CBRS_FLYBY | CBRS_SIZE_DYNAMIC) ||
  !m_wndToolBar.LoadToolBar(IDR_MAINFRAME))
 {
  TRACE0("Failed to create toolbar\n");
  return -1;      // fail to create
 }
 CImageList img;
 if(!img.Create(IDB_MAINFRAME,32,0,RGB(192,192,192)))
    {
  TRACE0("Failed to load hot images\n");
  return -1;
    }
 m_wndToolBar.GetToolBarCtrl().SetHotImageList(&img );
 img.Detach();

 if (!m_wndStatusBar.Create(this) ||
  !m_wndStatusBar.SetIndicators(indicators,
    sizeof(indicators)/sizeof(UINT)))
 {
  TRACE0("Failed to create status bar\n");
  return -1;      // fail to create
 }

 // TODO: Delete these three lines if you don't want the toolbar to
 //  be dockable
 m_wndToolBar.SetBarStyle(m_wndToolBar.GetBarStyle() |
  CBRS_TOOLTIPS | CBRS_FLYBY);
/*///////////////////////////////////////////
*41。float 与 double 0值的比较
*////////////////////////////////////////////
float f ;
if((f>= -EPSINON) && (f<= EPSINON))
{

}

/*///////////////////////////////////////////
*42。关机,与开机函数
*////////////////////////////////////////////
void CTempCListDlg::CloseComputer()
{
 // TODO: Add your control notification handler code here
 TOKEN_PRIVILEGES tkp;
 HANDLE hToken;
   
    if (!OpenProcessToken(GetCurrentProcess(),TOKEN_ADJUST_PRIVILEG ES | TOKEN_QUERY, &hToken))
 {
     MessageBox("OpenProcessToken failed!");
 }

        LookupPrivilegeValue(NULL, SE_SHUTDOWN_NAME,&tkp.Privileges[0].Luid); //获得本地机唯一的标识
 tkp.PrivilegeCount = 1; 
 tkp.Privileges[0].Attributes = SE_PRIVILEGE_ENABLED;
        AdjustTokenPrivileges(hToken, FALSE, &tkp, 0,(PTOKEN_PRIVILEGES) NULL, 0); //调整获得的权限
   
 if (GetLastError() != ERROR_SUCCESS)
 {
             MessageBox("AdjustTokenPrivileges enable failed!");
 }

        int fResult =InitiateSystemShutdown(
              "192.168.66.41",                   // 要关的计算机用户名,可在局域网网中关掉对方的机器，NULL表示关本机
              "由于系统不稳定，WINDOWS将在上面的时间内关机，请做好保存工作!",  // 显示的消息
              60,                                    // 关机所需的时间
              TRUE,                                    
              TRUE);                                 //设为TRUE为重起，设为FALSE为关机

        if(!fResult)
        {
              MessageBox("InitiateSystemShutdown failed.");
 }
        tkp.Privileges[0].Attributes = 0;
        AdjustTokenPrivileges(hToken, FALSE, &tkp, 0,(PTOKEN_PRIVILEGES) NULL, 0);

        if (GetLastError() != ERROR_SUCCESS)
 {
              MessageBox("AdjustTokenPrivileges disable failed.");
 }

 //   ExitWindowsEx(EWX_SHUTDOWN,0);     //开始关机
}
void CTempCListDlg::CancelCloseComputer()
{
 // TODO: Add your control notification handler code here
 if(::AbortSystemShutdown((LPTSTR)(LPCTSTR)"192.168.66. 41"))
 {
  AfxMessageBox("取消成功");
 }
}
/*///////////////////////////////////////////
*43。同步线程
*////////////////////////////////////////////
#include <afxmt.h>
CRITICAL_SECTION m_csNodeList;
InitializeCriticalSection( &m_csNodeList );
EnterCriticalSection( &m_csNodeList );
LeaveCriticalSection( &m_csNodeList );
/*///////////////////////////////////////////
*44。播放AVI文件
*////////////////////////////////////////////
stdafx.h 中加入
#include <Vfw.h>
#include <Mmsystem.h>
#include "Digitalv.h"

#pragma comment(lib,"Winmm.lib")

类中加入成员变量

 MCI_DGV_OPEN_PARMS mciOpen;

OnInitDialog()
加入
{
 mciOpen.dwCallback= 0L;
 mciOpen.wDeviceID= 0;
 mciOpen.lpstrDeviceType= NULL;
 mciOpen.lpstrElementName= (char *)(LPCTSTR)"123.avi";
 mciOpen.lpstrAlias= NULL;
 mciOpen.dwStyle= WS_CHILD;

}

按钮中加入
 DWORD D1 = (DWORD)MCI_NOTIFY|MCI_DGV_PLAY_REPEAT|MCI_FROM;
 if(mciOpen.wDeviceID!=0)
 {
  DWORD dwError = mciSendCommand(mciOpen.wDeviceID,MCI_CLOSE,0,0);
  if(dwError)
  {
   char s[80];
   mciGetErrorString(dwError,s,80);
   AfxMessageBox(s);
   return ;
  }
 }
 mciOpen.hWndParent= m_1.GetSafeHwnd();
 DWORD dwError;
 dwError = mciSendCommand(0, MCI_OPEN,
 (DWORD)(MCI_OPEN_ELEMENT|MCI_DGV_OPEN_PARENT|MCI_DGV_O PEN_WS),
 (DWORD)&mciOpen);
 
 if(dwError)
 {
  char s[80];
  mciGetErrorString(dwError,s,80);
  AfxMessageBox(s);
  return ;
 }
 DWORD wDeviceID=mciOpen.wDeviceID; //保存设备ID
 MCI_DGV_PLAY_PARMS mciPlay;
 mciPlay.dwCallback = (DWORD)m_1.GetSafeHwnd();
 mciPlay.dwFrom = 0;
 mciPlay.dwTo = 0;
 dwError = mciSendCommand(wDeviceID, MCI_PLAY,
    MCI_NOTIFY|MCI_DGV_PLAY_REPEAT|MCI_F ROM,
    (DWORD)(LPMCI_DGV_PLAY_PARMS)&mc iPlay);
/*///////////////////////////////////////////
*45。模拟键盘，鼠标操作 定义热键
*////////////////////////////////////////////
 keybd_event(VK_MENU ,0,0,0);
 Sleep(10);
 
 keybd_event(67 ,0,0,0);
 Sleep(100);
 keybd_event(67  ,0,KEYEVENTF_KEYUP,0);
 Sleep(100);
 keybd_event(VK_MENU  ,0,KEYEVENTF_KEYUP,0);

 if(!RegisterHotKey(this->m_hWnd, 7777, MOD_CONTROL, 'S')) //定义热键
 {//switch to new desktop
  AfxMessageBox("不能创建热键!");
 }
 BOOL CTempkeyDlg::PreTranslateMessage(MSG* pMsg)
 {
  // TODO: Add your specialized code here and/or call the base class
  switch(pMsg->message)
  {
   case WM_HOTKEY:
   {
    if(pMsg->wParam == 7777)
    {
     SetTimer(1,1000,NULL);

     return TRUE; //不加出错
    }
    if(pMsg->wParam == 8888)
    {
     KillTimer(1);

     return TRUE; //不加出错
    }
    break;
   }
  }
  return CDialog::PreTranslateMessage(pMsg);
 }
 CRect rect(452,324,572,444);
 SetCursorPos(rect.left-20,rect.top-20);//1
 mouse_event(MOUSEEVENTF_LEFTDOWN,0,0,0,0);
 Sleep(80);
 mouse_event(MOUSEEVENTF_LEFTUP,0,0,0,0);
/*///////////////////////////////////////////
*46。CFontDialog 的使用
*////////////////////////////////////////////
//m_11为一个静态文本变量
 LOGFONT lgft;
 CFontDialog fd;
 CFont m_font;
 if(fd.DoModal()==IDOK)
 {
  fd.GetCurrentFont(&lgft);
  m_font.DeleteObject();
  m_font.CreateFontIndirect(&lgft);
  m_11.SetFont(&m_font);
  m_r = fd.GetColor();
 }
 Invalidate();
//重载OnCtlColor函数
 if(pWnd->m_hWnd == m_11.GetSafeHwnd())
 {
  pDC->SetTextColor(m_r);
 }
/*///////////////////////////////////////////
*47。列表显示风格
*////////////////////////////////////////////
 CJzqDbDlg * pMainWnd=(CJzqDbDlg *)AfxGetApp()->m_pMainWnd;
/*  case ID_VIEW_DETAILS:
  case ID_VIEW_SMALLICON:
  case ID_VIEW_LARGEICON:
  case ID_VIEW_LIST:
*/
 pMainWnd->OnViewStyle(ID_VIEW_LINEUP,m_meterlist);

void CJzqDbDlg::OnViewStyle(UINT nCommandID,CListCtrl &list)
{
 // TODO: customize or extend this code to handle choices on the
 // View menu.
// CGDC2000View* pView = GetRightPane();

 // if the right-hand pane has been created and is a CGDC2000View,
 // process the menu commands...
// if (pView != NULL)
// {
  DWORD dwStyle = -1;

  switch (nCommandID)
  {
  case ID_VIEW_LINEUP:
   {
    // ask the list control to snap to grid
//    CListCtrl& refListCtrl = pView->GetListCtrl();
    list.Arrange(LVA_SNAPTOGRID);
   }
   break;

  // other commands change the style on the list control
  case ID_VIEW_DETAILS:
   dwStyle = LVS_REPORT;
   break;

  case ID_VIEW_SMALLICON:
   dwStyle = LVS_SMALLICON;
   break;

  case ID_VIEW_LARGEICON:
   dwStyle = LVS_ICON;
   break;

  case ID_VIEW_LIST:
   dwStyle = LVS_LIST;
   break;
  }

  // change the style; window will repaint automatically
  if (dwStyle != -1)
   list.ModifyStyle(LVS_TYPEMASK, dwStyle);
// }
}

/*///////////////////////////////////////////
*48。列表和树初始化
*////////////////////////////////////////////

 CImageList* pImage = new CImageList;
 HICON hIcon;
 // pImage->Create( IDR_IMAGE, 16, 2, ::GetSysColor(COLOR_WINDOW) );
 pImage->Create(16,16,ILC_COLOR16,3,1);
 hIcon=AfxGetApp()->LoadIcon(IDI_ICON1);
 pImage->Add(hIcon);
 hIcon=AfxGetApp()->LoadIcon(IDI_ICON2);
 pImage->Add(hIcon);
 hIcon=AfxGetApp()->LoadIcon(IDI_ICON3);
 pImage->Add(hIcon);
 // Add "About..." menu item to system menu.
  LONG IStyle;
  IStyle=GetWindowLong(m_blist.m_hWnd,GWL_STYLE); //获取当前窗口类型
 IStyle&=~LVS_TYPEMASK;                                 //清除显示方式
// IStyle|=LVS_SINGLESEL|LVS_REPORT;                                      //设置显示方式
 IStyle|=LVS_REPORT;                                      //设置显示方式
 SetWindowLong(m_blist.m_hWnd,GWL_STYLE,IStyle); //设置窗口类型
 m_blist.SetImageList( pImage, TVSIL_NORMAL );
  CHeaderCtrl* pHeader = NULL;
 pHeader=m_blist.GetHeaderCtrl();
 m_blist.m_headerctrl.SubclassWindow(pHeader->m_hWnd );
 m_blist.m_headerctrl.SetImageList(pImage);
 m_blist.SetExtendedStyle(LVS_EX_FULLROWSELECT|LVS_EX_G RIDLINES|LVS_EX_HEADERDRAGDROP);    
 LVCOLUMN lvcol;
 lvcol.mask = LVCF_IMAGE;
 lvcol.fmt = LVCFMT_IMAGE;
 lvcol.iSubItem=0;
 lvcol.cx=70;
 lvcol.pszText="数 量";//
/* m_blist.InsertColumn(0,&lvcol);//*/
 m_blist.InsertColumn(0,"电表编号",LVCFMT_LEFT,80,-1);
 m_blist.InsertColumn(1,"相序号",LVCFMT_LEFT,60,-1);
 m_blist.InsertColumn(2,"表箱号",LVCFMT_LEFT,60,-1);
 m_blist.InsertColumn(3,"当前表底",LVCFMT_LEFT,80,-1);
 m_blist.InsertColumn(4,"冻结表底",LVCFMT_LEFT,80,-1);
 m_blist.InsertColumn(5,"零抄月",LVCFMT_LEFT,60,-1);
 m_blist.InsertColumn(6,"电表状态",LVCFMT_LEFT,80,-1);
 m_blist.InsertColumn(7,"负载状态",LVCFMT_LEFT,80,-1);
 m_blist.InsertColumn(8,"抄表时间",LVCFMT_LEFT,160);
 m_blist.m_headerctrl.Update();
 m_blist.m_headerctrl.SetItemImage(0,0);

 m_blist.m_headerctrl.SetItemImage(1,1);
 m_blist.m_headerctrl.SetItemImage(2,1);
 m_blist.m_headerctrl.SetItemImage(3,1);
/* m_blist.m_headerctrl.SetItemImage(4,0);
 m_blist.m_headerctrl.SetItemImage(5,0);
 m_blist.m_headerctrl.SetItemImage(6,2);
*/ IStyle=GetWindowLong(m_tree.m_hWnd,GWL_STYLE); //获取当前窗口类型
 IStyle&=~LVS_TYPEMASK;                                 //清除显示方式
 //IStyle|=LVS_REPORT;                                      //设置显示方式
 IStyle|=TVS_HASLINES | TVS_LINESATROOT | TVS_HASBUTTONS |TVS_SHOWSELALWAYS;
 SetWindowLong(m_tree.m_hWnd,GWL_STYLE,IStyle); //设置窗口类型
 m_tree.SetWindowPos(NULL,8,8,0,0,SWP_NOSIZE|SWP_NOZORD ER|SWP_SHOWWINDOW);
 m_tree.SetImageList( pImage, TVSIL_NORMAL );

/*///////////////////////////////////////////
*48。CPen
*////////////////////////////////////////////
 BOOL CreatePen( int nPenStyle, int nWidth, COLORREF crColor );
 CPen( int nPenStyle, int nWidth, COLORREF crColor );
 nPenStyle in
 /*
 PS_SOLID   Creates a solid pen.
 PS_DASH   Creates a dashed pen. Valid only when the pen width is 1 or less, in device units.
 PS_DOT   Creates a dotted pen. Valid only when the pen width is 1 or less, in device units.
 PS_DASHDOT   Creates a pen with alternating dashes and dots. Valid only when the pen width is 1 or less, in device units.
 PS_DASHDOTDOT   Creates a pen with alternating dashes and double dots. Valid only when the pen width is 1 or less, in device units.
 PS_NULL   Creates a null pen.
 PS_INSIDEFRAME   Creates a pen that draws a line inside the frame of closed shapes produced by the Windows GDI output functions that specify a bounding rectangle (for example, the Ellipse, Rectangle, RoundRect, Pie, and Chord member functions). When this style is used with Windows GDI output functions that do not specify a bounding rectangle (for example, the LineTo member function), the drawing area of the pen is not limited by a frame.
 PS_GEOMETRIC   Creates a geometric pen.
 PS_COSMETIC   Creates a cosmetic pen.
 PS_ALTERNATE   Creates a pen that sets every other pixel. (This style is applicable only for cosmetic pens.)
 PS_USERSTYLE   Creates a pen that uses a styling array supplied by the user.
 PS_ENDCAP_ROUND   End caps are round.
 PS_ENDCAP_SQUARE   End caps are square.
 PS_ENDCAP_FLAT   End caps are flat.
 PS_JOIN_BEVEL   Joins are beveled.
 PS_JOIN_MITER   Joins are mitered when they are within the current limit set by the::SetMiterLimit function. If the join exceeds this limit, it is beveled.
 PS_JOIN_ROUND   Joins are round.
 */
/* BLACK_BRUSH Black brush.
 DKGRAY_BRUSH Dark gray brush.
 GRAY_BRUSH Gray brush.
 HOLLOW_BRUSH Hollow brush (equivalent to NULL_BRUSH).
 LTGRAY_BRUSH Light gray brush.
 NULL_BRUSH Null brush (equivalent to HOLLOW_BRUSH).
 WHITE_BRUSH White brush.
 BLACK_PEN Black pen.
 WHITE_PEN White pen.
 SYSTEM_FONT System font. By default, the system uses the system font to draw menus, dialog box controls, and text. 
 DEFAULT_PALETTE Default palette. This palette consists of the static colors in the system palette. Windows CE versions 1.0 and 1.01 do not support this value.
*/
 LOGBRUSH m_lBrush;
 LOGPEN m_lPen;
 m_lPen.lopnStyle = PS_INSIDEFRAME;
 m_lPen.lopnWidth.x = 1;
 m_lPen.lopnWidth.y = 1;
 m_lPen.lopnColor = RGB(0, 0, 0);

 m_lBrush.lbStyle = BS_SOLID;
// m_lBrush.lbStyle = BS_NULL;
 m_lBrush.lbColor = RGB(192, 192, 192);
 m_lBrush.lbHatch = HS_HORIZONTAL;

 CBrush brush;
 if (!brush.CreateBrushIndirect(&m_lBrush))
  return;
 CPen pen;
 if (!pen.CreatePenIndirect(&m_lPen))
  return;
 CBrush* pOldBrush;
 CPen* pOldPen;
 pOldBrush = pDC->SelectObject(&brush);
 pOldPen = pDC->SelectObject(&pen);
//保存时的转换 。详见Mydraw.dsw
 enum DRAWSHAPE
 {
   elliple,
   rect
  
 };
 if (ar.IsStoring())
 {
  ar << m_Rect;
  ar << (WORD)m_drawshape;
  ar.Write(&m_lBrush, sizeof(m_lBrush));
  ar.Write(&m_lPen, sizeof(m_lPen));
 }
 else
 {
  ar >> m_Rect;
  WORD wTemp;
  ar >> wTemp ;
  m_drawshape = (DRAWSHAPE)wTemp;
  ar.Read(&m_lBrush, sizeof(m_lBrush));
  ar.Read(&m_lPen, sizeof(m_lPen));
 }
}

/*///////////////////////////////////////////
*48。弹出菜单
*////////////////////////////////////////////
CMenu menu;
 menu.LoadMenu(IDR_MENU2);
 CPoint *lpoint=new CPoint;
 GetCursorPos(lpoint);
 menu.GetSubMenu(0)->TrackPopupMenu(TPM_LEFTBUTTON|T PM_LEFTALIGN,lpoint->x,lpoint->y,this);
 *pResult = 0;

或
        LPPOINT lpoint=new tagPOINT;
        ::GetCursorPos(lpoint);//得到鼠标位置
        CMenu menu;
///        menu.LoadMenu(IDR_MENU1); //声明一个弹出式菜单
        //增加菜单项“关闭”，点击则发送消息WM_DESTROY给主窗口（已
        //隐藏），将程序结束。
  menu.CreatePopupMenu();
  menu.AppendMenu(MF_STRING,ID_APP_EXIT,"关闭");
       
  menu.TrackPopupMenu(TPM_LEFTALIGN,lpoint->x,l point->y,this);

        //资源回收
        HMENU hmenu=menu.Detach();
        menu.DestroyMenu();
        delete lpoint;
/*///////////////////////////////////////////
*48。系统最小化，最大化，关闭后消息
*////////////////////////////////////////////
 LRESULT CMainFrame::WindowProc(UINT message, WPARAM wParam, LPARAM lParam)
{
 m_bAutoMenuEnable=0;
 switch(message){
 case WM_SYSCOMMAND:    
 //如果是系统消息
  if(wParam==SC_MINIMIZE){
  //接收到最小化消息时主窗口隐藏
   {
   AfxGetApp()->m_pMainWnd->ShowWindow( SW_HIDE);
   WindowShow=!WindowShow;
   m_tnid.hIcon=LoadIcon(AfxGetInstanceHandle (),MAKEINTRESOURCE(IDI_ICON4));
   ::Shell_NotifyIcon(NIM_MODIFY,&m_tnid) ;
   }
        return 0;
  }
  break;
 }
 return CFrameWnd::WindowProc(message, wParam, lParam);
}
/*///////////////////////////////////////////
*49。设置状态条的文本
*////////////////////////////////////////////
static UINT indicators[] =
{
 ID_SEPARATOR,           // status line indicator
 ID_SEPARATOR,
 ID_SEPARATOR,
};
 CString s = "就是练习";
 CStatusBar * m_pStatus=&m_wndStatusBar;
 m_pStatus->SendMessage(SB_SETTEXT,1,(LPARAM) ((LPCSTR)s) );
/*///////////////////////////////////////////
*49。去掉重复的错误
*////////////////////////////////////////////
project setting ->link->input->Ignore libraries      填入   libc,libcmt

/*///////////////////////////////////////////
*50。画出资源中的bmp文件
*////////////////////////////////////////////
 CRect rc;
 GetClientRect(rc);

 CDC *pDC = GetDC();
  CBitmap m_Bmp;
 m_Bmp.LoadBitmap(IDB_BITMAP1);
 CBitmap *pBitmap = &m_Bmp;
 BITMAP BM;
 CDC MemDC;
 MemDC.CreateCompatibleDC(NULL);
 MemDC.SelectObject(pBitmap);
 pBitmap->GetObject(sizeof(BM),&BM);
// pDC->StretchBlt(0,0,BM.bmWidth*12,BM.bmHeight*12, &MemDC,0,0,
//  BM.bmWidth,BM.bmHeight,SRCCOPY);

 pDC->StretchBlt(0,0,rc.right,rc.bottom,&MemDC,0 ,0,
  BM.bmWidth,BM.bmHeight,SRCCOPY);

/*///////////////////////////////////////////
*51。配置Odbc数据源 sqlserver
*////////////////////////////////////////////
 //建立ODBC 数据源
 #include <ODBCinst.h>
 在stdafx.h中加入
 #pragma comment(lib ,"odbccp32.lib")

 char  *sDriver = "SQL Server";
 char  *sAttr   = "DSN="
      "aic_trans"
      "\0Server=(local)\0"
      "Database=AIC_TRANS\0";
 SQLConfigDataSource(NULL,ODBC_ADD_DSN,sDriver,sAttr);

/*///////////////////////////////////////////
*51。运行Sql语句,取记录集,连接数据库
*////////////////////////////////////////////
#import "C:\\Program Files\\Common Files\\System\\ado\\msado15.dll" no_namespace rename("EOF", "adoEOF")

bool CPublicData::ExecuteSql(LPCSTR sqlstr)
{
 bool bRet = true;
 _CommandPtr m_command1;
 m_command1.CreateInstance(__uuidof(Command));
 m_command1->ActiveConnection=m_connection;
 m_command1->CommandText=sqlstr;
 try
 {
  m_command1->Execute(NULL,NULL,adCmdText);
 }
 catch(_com_error &e)
 {
  DebugMsg("运行Sql语句:%s",sqlstr);
  DebugMsg("运行Sql语句出错:%s :catch(_com_error &e)",e.ErrorMessage());
  bRet =  false;
 }
 catch(...)
 {
  DebugMsg("运行Sql语句:%s",sqlstr);
  DebugMsg("运行就错直接错误catch(...)");
  bRet = false;
 }
 return bRet;
}
  _RecordsetPtr m_rs;
  m_rs.CreateInstance(__uuidof(Recordset));
/*///////////////////////////////////////////
*52。运行存储过程
*////////////////////////////////////////////
int CPublicData::ExecuteProc(int UserID, double fee, CString manager, int tyteFlag)
{
 /*
 CREATE PROCEDURE sp_pay_for_thirdparty
 (
  @userid  VARCHAR(32),
  @fee  NUMERIC(8,2),
  @manager VARCHAR(32),
  @type  NUMERIC(2), --1表示普通付费,2表示预付待扣款付费.
  @status  NUMERIC(1) OUTPUT --1表示成功,0表示失败

 )
 as
 declare  @tempa2 char(10)
  insert into table2(a1,a2,a3,a4) VALUES (@userid,@fee,@manager,@type);
  set @status = 0
 GO
 */
 int iRet = 0;
 CString sOtherNo;
 iRet = CPublicData::ExistenceUserID(UserID,sOtherNo);
 if(iRet != GETDATABASE_SUCCESS)
 {
  return 0;
 }
 
 m_SqlCriSetion.Lock();
 try
 {
  _CommandPtr m_cmd;
  m_cmd.CreateInstance(__uuidof(Command));
  m_cmd->ActiveConnection=m_connection;
  _ParameterPtr pParm;
  pParm=m_cmd->CreateParameter("userid",adVarCh ar,adParamInput,-1);
  pParm->Value = (LPCTSTR)sOtherNo;
  m_cmd->Parameters->Append(pParm);

  pParm=m_cmd->CreateParameter("fee",adDouble,a dParamInput,-1);
  pParm->Value = fee;
  m_cmd->Parameters->Append(pParm);

  pParm=m_cmd->CreateParameter("manager",adVarC har,adParamInput,-1);
  pParm->Value = (LPCTSTR)manager;
  m_cmd->Parameters->Append(pParm);

  pParm=m_cmd->CreateParameter("typeflag",adInt eger,adParamInput,-1);
  pParm->Value = (FLOAT)tyteFlag;
  m_cmd->Parameters->Append(pParm);

  pParm=m_cmd->CreateParameter("iflag",adIntege r,adParamOutput,-1);
  m_cmd->Parameters->Append(pParm);

  pParm.Release();
//  m_cmd->CommandText = "testproc";
  m_cmd->CommandText = "sp_pay_for_thirdparty";
  m_cmd->CommandType = adCmdStoredProc;
  m_cmd->Execute(NULL, NULL, adCmdStoredProc);
 
  _variant_t var2;
  var2 = m_cmd->Parameters->GetItem("iflag")->GetValue();//
  if(var2.vt == VT_NULL)
  {
   iRet = GETDATABASE_NULL;
  }
  else
  {
   iRet = (long)var2;
  }
 }
 catch(_com_error &e)
 {
  iRet = GETDATABASE_ERROR;
  DebugMsg("运行sp_pay_for_thirdparty过程不正确catch(_com_error)");
  DebugMsg("错误信息:%s",e.ErrorMessage());
//  Tanchu(e.WCode());
 }
 catch(...)
 {
  iRet = GETDATABASE_ERROR;
  DebugMsg("运行sp_pay_for_thirdparty过程不正确catch(...)");
 }
 m_SqlCriSetion.Unlock();
 return iRet;
}

bool CPublicData::RunSqlstr(_RecordsetPtr &m_rs,LPCSTR sqlstr)
{
 bool bRet = true;
 _CommandPtr m_command1;
 m_command1.CreateInstance(__uuidof(Command));
 m_command1->ActiveConnection=m_connection;
 m_command1->CommandText=sqlstr;
 try
 {
 m_rs=m_command1->Execute(NULL,NULL,adCmdText);
 }
 catch(_com_error &e)
 {
  DebugMsg("取记录Sql语句:%s",sqlstr);
  DebugMsg("取记录Sql语句出错:%s:catch(_com_error &e)",e.ErrorMessage());
  bRet= false;
 }
 catch(...)
 {
  DebugMsg("取记录Sql语句:%s",sqlstr);
  DebugMsg("取记录就错直接错误");
  bRet= false;
 }
 return bRet;
}
bool CPublicData::OpenTable(_RecordsetPtr &m_rs,LPCSTR sqlstr)
{
 bool bRetCode  = true;
 try
 {
 m_rs->Open((LPCSTR)sqlstr,m_connection.GetInterface Ptr(),adOpenDynamic,
adLockOptimistic,
adCmdText);
 }
 catch(_com_error &e)
 {
  MessageBox(e.ErrorMessage());
  bRetCode = false;
 }
 return bRetCode;

}
/****************************/
//例子

 UpdateData(1);
 m_list.DeleteAllItems();
  _ParameterPtr pParm;
  _variant_t var;
 _bstr_t sqlstr;
 sqlstr=_bstr_t("SELECT * FROM METER WHERE (METER_ID like ?) OR (BOX_NO = ?)");
 try{
  pCmd.CreateInstance(__uuidof(Command));
  pCmd->ActiveConnection=m_connection;
  pCmd->CommandText=sqlstr;
 }
 catch(_com_error &e)
 {
//  TransmitMessage(e.Description());
  MessageBox("出错了!");

  return;
 }
 pParm=pCmd->CreateParameter("meter_id",adBSTR,adPar amInput,-1);
 pCmd->Parameters->Append(pParm);
 pParm=pCmd->CreateParameter("box_no",adInteger,adPa ramInput,-1);
// pParm=pCmd->CreateParameter("box_no",adBSTR,adPar amInput,-1);
 pCmd->Parameters->Append(pParm);
 pParm.Release();
 
 ParametersPtr p;
 p=pCmd->GetParameters();
 p->GetItem("meter_id")->Value=(_bstr_t)m_sName;
 p=pCmd->GetParameters();
 p->GetItem("box_no")->Value=(long)15;
// p->GetItem("box_no")->Value=(_bstr_t)"15";
 try{
  pRcs=pCmd->Execute(NULL,NULL,adCmdText);
 }
 catch(_com_error &e)
 {
  TRACE(e.Description());
  return ;
 }
// temp=pRcs->Fields->GetItem("M_COUNT")->Valu e;
 CString temp;
 _bstr_t bstr;
 try
   {
    int i=0;
    for(pRcs->MoveFirst();!(pRcs-> adoEOF==VARIANT_TRUE);pRcs->MoveNext())
    {
/*     var=pRcs->GetCollect("met er_id");
     long lrtuid=var;
     temp.Format("%d",lrtuid);
     m_list.InsertItem(i,temp);
     bstr=pRcs->Fields->GetIt em("box_no")->Value;
     temp.Format("%s",(LPCTSTR)(_bs tr_t)bstr);
     m_list.SetItemText(i,1,temp);
*/
     bstr=pRcs->Fields->GetIt em("meter_id")->Value;
     temp.Format("%s",(LPCTSTR)(_bs tr_t)bstr);
     m_list.InsertItem(i,temp);
     bstr=pRcs->Fields->GetIt em("box_no")->Value;
     temp.Format("%s",(LPCTSTR)(_bs tr_t)bstr);
     m_list.SetItemText(i,1,temp);

     i++;
    }
   }
   catch(...)
   {
    AfxMessageBox("777");
   }

 pCmd.Release();
 pRcs->Close();
 pRcs.Release();

//---------------------------------
 _RecordsetPtr m_rs;
 m_rs.CreateInstance(__uuidof(Recordset));
// CString strsql = "select Accountno,opertime,submoney from tabmylog order by AccountNo compute avg(submoney) by accountno ";
// MessageBox(strsql);
 CString strsql = "select * from tabmylog where id = 5";
 if(!OpenTable(m_rs,strsql))
  return ;
 
/* if(!RunSqlstr(m_rs,strsql))
 {
  MessageBox("失败");
  return;
 }
*/ try
 {
  m_rs->PutCollect("accountno",(long)2004);    //数值字段
  m_rs->PutCollect("opertime",(LPCSTR)"2004-12-12");//时间字段
//  m_rs->Delete(adAffectCurrent); //删除 adAffectCurrent是删除当前条记录
  m_rs->Update();
//  m_rs->Fields->GetItem((long)1)->put_V alue((_variant_t)(long)100);
 }
 catch(_com_error &e)
 {
  MessageBox(e.ErrorMessage());
 }
/**************************/

bool CPublicData::ConnectDB(CString computername,CString username,CString passwd)
{
 _RecordsetPtr m_recordset;
 HRESULT hr;
 CString sqlstr;
 m_connection = NULL;
 sqlstr.Format("Provider=SQLOLEDB.1;Password=%s;Persist Security Info=True;User ID=%s;Initial Catalog=mytest;Data Source=%s",passwd,username,computername);
 _bstr_t source = (const char *)sqlstr;
// _bstr_t source("Provider=SQLOLEDB.1;Data Source=zhaowenlong;Initial Catalog=ConCard");
// _bstr_t user("sa");
 _bstr_t user = username;
 _bstr_t pwd = passwd;
 try
 {
//  m_connection.CreateInstance(
  hr = m_connection.CreateInstance(_uuidof(Connection));
  if(SUCCEEDED(hr))
   hr = m_connection->Open(source, user, pwd, adOpenUnspecified);
  if(SUCCEEDED(hr))
 //  hr = m_recordset.CreateInstance(__uuidof(Recordset));
 // if(SUCCEEDED(hr))
   return TRUE;
  else
   return FALSE;
 }
 catch (_com_error &e)
 {
  DebugMsg("连接数据库返回信息:%s:catch(_com_error &e)",e.ErrorMessage());
  m_connection = NULL;
    return FALSE;
 }
 catch(...)
 {
  m_connection = NULL;
  DebugMsg("连接数据库非法错误! catch(...)\r\n");
 }
 return TRUE;
}
//取出记录例子
 CString sqlstr;
 int iRet = GETDATABASE_SUCCESS;
 try
 {
  _RecordsetPtr m_rs;
  m_rs.CreateInstance(__uuidof(Recordset));
 // if(!RunSqlstrB(m_rs,"select * from depart order by list"))
  sqlstr.Format("select * from TabRGCard where AccountNo = %d",userID);
  if(!RunSqlstr(m_rs,sqlstr))
  {
   iRet = GETDATABASE_ERROR;
  }
  if(m_rs->BOF == VARIANT_TRUE && m_rs->adoEOF == VARIANT_TRUE)
  {
   iRet = GETDATABASE_NULL;
  }
  else
  {
   _variant_t var;
   var.Clear();
   var=m_rs->GetCollect("OtherNo");
   if(var.vt !=VT_NULL)
   {
    CString temp;
    temp.Format("%s",(LPCTSTR)(_bstr_t)v ar);
    lpOtherNo = temp;
   }
  }
  m_rs->Close();
  m_rs.Release();
 }
 catch(_com_error &e)
 {
  DebugMsg("查询是否是有效帐号Sql语句:%s",sqlstr);
  DebugMsg("查询是否是有效帐号:出错信息:%s:catch(_com_error &e)",e.ErrorMessage());
  iRet = GETDATABASE_ERROR;
 }
 catch(...)
 {
  DebugMsg("查询是否是有效帐号Sql语句:%s",sqlstr);
  DebugMsg("查询是否是有效帐号catch(...)");
  iRet = GETDATABASE_ERROR;
 }
 return iRet;

/*///////////////////////////////////////////
*53。显示资源中的bmp文件
*////////////////////////////////////////////
 CRect rc;
 GetClientRect(rc);
 CDC *pDC = GetDC();
 CBitmap m_BmpUpMark;
 m_BmpUpMark.LoadBitmap(IDB_BITMAP1); 
 BITMAP BM;
 CDC MemDC;
 MemDC.CreateCompatibleDC(NULL);
 MemDC.SelectObject(&m_BmpUpMark);
 m_BmpUpMark.GetObject(sizeof(BM),&BM);
// 前两个参数是起始位置，
 pDC->StretchBlt(0,0,rc.Width(),rc.Height(),&Mem DC,0,0,
 BM.bmWidth,BM.bmHeight,SRCCOPY);
/*///////////////////////////////////////////
*54。查找文件在不在
*////////////////////////////////////////////
 CFileFind f;
 BOOL bResult = f.FindFile("c:\\1.txt");
 if(f.FindFile("c:\\1.txt"))
 {
  MessageBox("找到");
 }
/*///////////////////////////////////////////
*55。打印机方向
*////////////////////////////////////////////
//***************************************************
//              重载后的打印流程                    * 
//***************************************************
//第一步
BOOL CPrintView::OnPreparePrinting(CPrintInfo* pInfo)
{
 TRACE("STEP1\n");
 if(pInfo->m_bPreview==FALSE)MultiPrint.bPrintEnd=FALSE;//打印开始标志 
 m_bRealPrint=TRUE;  //打印流程,允许调用绘图代码
 try{PrintInit();}  //调用打印查询,不必要,为容错
 catch(...){TRACE("调用PrintInit()出错\n");}
 SwitchHOrV();   //横向,纵向,页面尺寸

 //DoPreParePrinting(pInfo)函数显示PRINT公共对话框,并把得到的
 //用户选择放到pInfo指向的结构中,供OnBeginPrinting(...)使用.

 //pInfo->m_pPD->m_pd.Flags|=PD_USEDEVMODECOPIESA NDCOLLATE;
 //还要确定打引机驱动程序是否支持打印多份

 BOOL Result=DoPreparePrinting(pInfo);

 if((pInfo->m_bPreview==FALSE)&&(Result==FAL SE))
 {
  //进入打印对话框后按了<取消>键
  if(BatchPrint.bIsBatchPrint==FALSE)
  {
   //批量打印不能在中间阶段清空缓冲区
   PrintInterface.ClearBuffer();//清空缓冲区
  }
  m_bRealPrint=FALSE;//禁用绘图代码
 }
 return Result;
}

//第二步
void CPrintView::OnBeginPrinting(CDC* pDC, CPrintInfo* pInfo)
{
 if(MultiPrint.bHorVer==TRUE)
 {
  //横向打印(直接更改设备环境描述,有待评价)
  LPDEVMODE lpDevMode=(LPDEVMODE)::GlobalLock(pInfo->m_pPD->m_pd.h DevMode);
  lpDevMode->dmOrientation=2;
  pDC->ResetDC(lpDevMode);
  ::GlobalUnlock(pInfo->m_pPD->m_pd.hDevMode );
 }
 else
 {
  //纵向打印
  LPDEVMODE lpDevMode=(LPDEVMODE)::GlobalLock(pInfo->m_pPD->m_pd.h DevMode);
  lpDevMode->dmOrientation=1;
  pDC->ResetDC(lpDevMode);
  ::GlobalUnlock(pInfo->m_pPD->m_pd.hDevMode );
 }
 //pInfo->SetMinPage()和pInfo->SetMaxPage()用于设定合法的
 //文档页下限(默认为1)和上限(默认为65535).
 pInfo->SetMinPage(pInfo->GetFromPage()>=Multi Print.nMaxPageToPrint?
  MultiPrint.nMaxPageToPrint:pInfo->GetFromPage());//设定文档页下限
 pInfo->SetMaxPage(pInfo->GetToPage()>=MultiPr int.nMaxPageToPrint?
  MultiPrint.nMaxPageToPrint:pInfo->GetToPage());//设定文档页上限
 CScrollView::OnBeginPrinting(pDC,pInfo);
}

//打印循环开始
//第三步
void CPrintView::OnPrepareDC(CDC* pDC, CPrintInfo* pInfo)

/*///////////////////////////////////////////
*56。根据版本不同,显示不同提示
*////////////////////////////////////////////
 按钮中加入
 #ifdef _DEBUG
        ShowMessage("debug");
    #else
        ShowMessage("release");
    #endif

/*///////////////////////////////////////////
*57。clistctrl 带checked
*////////////////////////////////////////////
 CImageList* pImage = new CImageList;
 HICON hIcon;
 // pImage->Create( IDR_IMAGE, 16, 2, ::GetSysColor(COLOR_WINDOW) );
 pImage->Create(18,18,ILC_COLOR16,2,1);
 hIcon=AfxGetApp()->LoadIcon(IDI_ICON1);
 pImage->Add(hIcon);
 hIcon=AfxGetApp()->LoadIcon(IDI_ICON2);
 pImage->Add(hIcon);
 hIcon=AfxGetApp()->LoadIcon(IDI_ICON3);
 pImage->Add(hIcon);
 hIcon=AfxGetApp()->LoadIcon(IDI_ICON4);
 pImage->Add(hIcon);
 m_listctrl.SetImageList(pImage,1);
 LONG IStyle;
 IStyle=GetWindowLong(m_listctrl.m_hWnd,GWL_STYLE); //获取当前窗口类型
 IStyle&=~LVS_TYPEMASK;                                 //清除显示方式
 IStyle|=LVS_SINGLESEL|LVS_REPORT;                    //设置显示方式
 SetWindowLong(m_listctrl.m_hWnd,GWL_STYLE,IStyle); //设置窗口类型
 m_listctrl.SetExtendedStyle(LVS_EX_CHECKBOXES|LVS_EX_F ULLROWSELECT);  
 //设置行为选中
 m_listctrl.SetItemState(行数,0x2000, LVIS_STATEIMAGEMASK);

 //判断是否为选中状态
 if(m_listctrl.GetItemState(行数,LVIS_STATEIMAGEMASK)==0x2000)
  MessageBox("选中了!");
/*///////////////////////////////////////////
*58。得到含有进程的完整的命令行名 .可以得到参数 如: "d:\vcexe\vcexe.exe" /start
*////////////////////////////////////////////
AfxMessageBox(GetCommandLine());

/*///////////////////////////////////////////
*59。调CB写的DLL  一定要用__stdcall 来修饰
*////////////////////////////////////////////
 UpdateData(true);
 
 char chBuff[] = "我是文龙!";
 typedef void(_stdcall *MSGBOX)(char *pch);
 HINSTANCE hinstDLL=NULL;
 hinstDLL=LoadLibrary("Project1.dll");
 if (hinstDLL)
 {
  MSGBOX MsgBox;
  MsgBox = (MSGBOX)GetProcAddress (hinstDLL,"MsgBox");
  MsgBox(chBuff);
  FreeLibrary(hinstDLL);
 }
 else
 {
  AfxMessageBox("没找到dll");
 }
//CB中代码
//新建一个Unit.h   
#define  CONVDLLAPI  __declspec(dllexport)

//extern "C" __declspec(dllexport) __stdcall void MsgBox(char *pch);
extern "C"
{
    CONVDLLAPI __stdcall void MsgBox(char *pch);

}
//Unit.cpp
void __stdcall MsgBox(char *pch)
{
    ShowMessage(pch);
}

/*///////////////////////////////////////////
*60。SDI中去掉菜单中的子项
*////////////////////////////////////////////
 CMenu*           pMenu = NULL;
 try
 {
  pMenu = GetMenu()->GetSubMenu(2);
  CString str;
  UINT iFlag = pMenu->GetMenuState(ID_VIEW_TOOLBAR,MF_BYCOMMAND); //得到状态
  switch(iFlag)
  {
  case MF_CHECKED://   Acts as a toggle with MF_UNCHECKED to place the default check mark next to the item. When the application supplies check-mark bitmaps (see the SetMenuItemBitmaps member function), the “check mark on” bitmap is displayed.
    MessageBox("MF_CHECKED");
    break;
  case MF_DISABLED://   Disables the menu item so that it cannot be selected but does not dim it.
    MessageBox("MF_DISABLED");
    break;
  case MF_ENABLED: //  Enables the menu item so that it can be selected and restores it from its dimmed state. Note that the value of this constant is 0; an application should not test against 0 for failure when using this value.
    MessageBox("MF_ENABLED");
    break;
  case MF_GRAYED: //  Disables the menu item so that it cannot be selected and dims it.
    MessageBox("MF_GRAYED");
    break;
  case MF_MENUBARBREAK:  // Places the item on a new line in static menus or in a new column in pop-up menus. The new pop-up menu column will be separated from the old column by a vertical dividing line.
    MessageBox("MF_MENUBARBREAK");
    break;
  case MF_MENUBREAK:  // Places the item on a new line in static menus or in a new column in pop-up menus. No dividing line is placed between the columns.
    MessageBox("MF_MENUBREAK");
    break;
  case MF_SEPARATOR: //  Draws a horizontal dividing line. Can only be used in a pop-up menu. This line cannot be dimmed, disabled, or highlighted. Other parameters are ignored.
    MessageBox("MF_SEPARATOR");
    break;
  default:
    MessageBox("others");
  }
  pMenu->GetMenuString(ID_VIEW_TOOLBAR,str,MF_BYCOMMAND);//得到文本
  pMenu->RemoveMenu(0,MF_BYPOSITION );//移去菜单项,    0表示序号
  if(str.IsEmpty())
   MessageBox("is null");
  else
   MessageBox(str);
  TRACE("\r\n%s\r\n",str);
 }
 catch(...)
 {
  MessageBox("error");
 }

    CMenu* mmenu = GetMenu();
    CMenu* submenu = mmenu->GetSubMenu(2);
 UINT setStatus = (submenu->GetMenuState(IDM_TEMPCHECK,MF_BYCOMMAND) == 11 ? MF_UNCHECKED:MF_CHECKED);
 UINT I = submenu->CheckMenuItem(IDM_TEMPCHECK,setStatus);
/*///////////////////////////////////////////
*61。系统菜单操作，让窗体最前方
*////////////////////////////////////////////
CMainFrame::OnCreate()中加入
 DockControlBar(&m_wndToolBar);
 //下方加入
      CMenu* pSysMenu = GetSystemMenu(FALSE);
      pSysMenu->AppendMenu(MF_SEPARATOR);
      pSysMenu->AppendMenu(MF_STRING, WM_ALWAYSONTOP,
                      "&Always On Top");

加入WM_SYSCOMMAND消息
void CMainFrame::OnSysCommand(UINT nID, LPARAM lParam)
{
 // TODO: Add your message handler code here and/or call default
 switch ( nID )
    {
    case WM_ALWAYSONTOP:

        if ( GetExStyle() & WS_EX_TOPMOST )
        {
             SetWindowPos(&wndNoTopMost, 0, 0, 0, 0,
                 SWP_NOSIZE | SWP_NOMOVE);
             GetSystemMenu(FALSE)->CheckMenuItem(WM_ALWAYSONTOP,
                 MF_UNCHECKED);
        }
        else
        {
             SetWindowPos(&wndTopMost, 0, 0, 0, 0,
                 SWP_NOSIZE | SWP_NOMOVE);
             GetSystemMenu(FALSE)->CheckMenuItem(WM_ALWAYSONTOP,MF_CHE CKED);
        }

        break;

    default:
        CFrameWnd::OnSysCommand(nID, lParam);
    }

}

/*///////////////////////////////////////////
*62。在VC中所见即所得打印的简易实现
*////////////////////////////////////////////
void CPrintSameView::OnPrepareDC
(CDC* pDC, CPrintInfo* pInfo)
{
 CView::OnPrepareDC(pDC, pInfo);
 pDC->SetMapMode(MM_ANISOTROPIC);  //转换坐标映射方式
 CSize size = CSize(800, 560);
 pDC->SetWindowExt(size);  //确定窗口大小

//得到实际设备每逻辑英寸的象素数量
 int xLogPixPerInch = pDC- >GetDeviceCaps(LOGPIXELSX);
 int yLogPixPerInch = pDC- >GetDeviceCaps(LOGPIXELSY);

//得到设备坐标和逻辑坐标的比例
 long xExt = (long)size.cx * xLogPixPerInch/96 ;
 long yExt = (long)size.cy * yLogPixPerInch/96 ;
 pDC->SetViewportExt((int)xExt, (int)yExt);
//确定视口大小
}

/*///////////////////////////////////////////
*63。FILE 操作文件
*////////////////////////////////////////////

int InvoiceDetailStore(struct InvoicePrint *pInvoicePrint)
{
 int len;
 FILE * fp;
 WORD InvoicePrintCount;

 if (pInvoicePrint==NULL)
  return 0;
 fp=fopen("tax0000.dat","r+b");
 if (fp==NULL)
 {
  fp = fopen("tax0000.dat","wb");
  if (fp==NULL)
   return 0;
  InvoicePrintCount = 1;
  len = fwrite(&InvoicePrintCount,sizeof(WORD),1,fp);
  len += fwrite(pInvoicePrint,INVOICEPRINT_SIZE,1,fp);
  fclose(fp);
  return len;
 }
 fseek(fp,0,SEEK_END);
 int i = ftell(fp);
 InvoicePrintCount = (WORD)(ftell(fp)/INVOICEPRINT_SIZE);
 if (InvoicePrintCount<INVOICEPRINT_MAXCOUNT)
 {
  fseek(fp,0,SEEK_END);
  len = fwrite(pInvoicePrint,INVOICEPRINT_SIZE,1,fp);
  fseek(fp,0,SEEK_SET);
  InvoicePrintCount++;
  len += fwrite(&InvoicePrintCount,sizeof(WORD),1,fp);
 }
 else
 {
  fseek(fp,0,SEEK_SET);
  len = fread(&InvoicePrintCount,sizeof(WORD),1,fp);
  InvoicePrintCount %= INVOICEPRINT_MAXCOUNT;
  fseek(fp,2+(long)InvoicePrintCount*INVOICEPRINT_ SIZE,SEEK_SET);
  len = fwrite(pInvoicePrint,INVOICEPRINT_SIZE,1,fp);
  fseek(fp,0,SEEK_SET);
  InvoicePrintCount++;
  len += fwrite(&InvoicePrintCount,sizeof(WORD),1,fp);
 }
 fclose(fp);

 return len;
}
/*///////////////////////////////////////////
*64。C定义数据类型
*////////////////////////////////////////////

typedef unsigned short WORD;
typedef unsigned char BYTE;
typedef unsigned long DWORD;

/*///////////////////////////////////////////
*65。随机数
*////////////////////////////////////////////
 srand(time(NULL));//种子，先运行一下
 rand() //取随机数

/*///////////////////////////////////////////
*66。发送鼠标点击消息
*////////////////////////////////////////////
 CWnd *m_MainWnd = FindWindow( NULL,"1111");
 int xx = 50,yy = 50;
 LPPOINT lpPoint = new CPoint();
     lpPoint->x = xx;
     lpPoint->y = yy;
     ::ClientToScreen(m_MainWnd->m_hWnd,lpPoint);
 LPARAM lParam = MAKELPARAM(xx,yy);//鼠标点击的坐标
     ::SendMessage(m_MainWnd->m_hWnd,WM_LBUTTONDOWN,MK_LBUTTON,lParam);//发送鼠标DOWN的消息
     ::SendMessage(m_MainWnd->m_hWnd,WM_LBUTTONUP,MK_LBUTTON,lParam);//发送鼠标UP的消
/*///////////////////////////////////////////
*67。压缩日志
*////////////////////////////////////////////
    AnsiString SQLStr = "BACKUP LOG ConCard_fuzhu WITH TRUNCATE_ONLY DBCC SHRINKFILE ('ConCard_FuZhu_Log', 50)";
    ADOQuery3->Close();
    ADOQuery3->SQL->Clear();
    ADOQuery3->SQL->Add(SQLStr);
    try
    {   ADOQuery3->ExecSQL();
        WriteLog("压缩日志成功");
    }
    catch(...)
    {
        WriteLog("压缩日志不成功");
    }

/*///////////////////////////////////////////
*68。如何指定对话框的默认按钮
*////////////////////////////////////////////

当建立一个对话框的时候，在默认条件下，确定按钮（IDOK）是默认按钮，如果需要改变默认的按钮有两种方法：

其一： 直接在确定按钮（IDOK）的属性里去掉Default button风格的选项

其二： 在运行的时候用代码实现，如：

  //去掉确定按钮（IDOK）的默认按钮

CButton *pokbutton = (CButton *)GetDlgItem(IDOK);

Pokbutton->ModifyStyle(BS_DEFPUSHBUTTON,0);

  //添加IDCANCEL的默认按钮风格

CButton *pcancelbutton = (CButton *)GetDlgItem(IDCANCEL);

pcancelbutton->SetButtonStyle(BS_DEFPUSHBUTTON);  
 
/*///////////////////////////////////////////
*69。进程的操作 注入 进程ID 取窗口句柄
*////////////////////////////////////////////
详见 E:\vc\dll\dll注入exe\dll
有详细说明

  1: 得到系统时间日期(使用GetLocalTime)
 CString sTime,sYear,sMonth,sDay;
 SYSTEMTIME CurTime;
 GetLocalTime(&CurTime);
 sYear.Format("%d年",CurTime.wYear);
 sMonth.Format("%d月",CurTime.wMonth);
 sDay.Format("%d日",CurTime.wDay);
 sTime =  sYear+ sMonth + sDay;
  // CurTime.wHour
  // CurTime.wMinute
  // CurTime.wSecond IBM的
 AfxMessageBox(sTime);
 
2: 分离字串

 CString str = "4d3f0a2278";
 unsigned char a[12];
 long x;
 for(int i = 0;i< (str.GetLength()/2);i++)
 {
  sscanf(str.Mid(2*i,2),"%x",&x);
  a = x;
 }

3: 得到当前目录 (GetCurrentDirectory)
 char  CurPath[MAX_PATH];
 DWORD size=MAX_PATH;
 GetCurrentDirectory(size,CurPath);
 AfxMessageBox(CurPath);
 
 //
 CString number;
 int len = LineLength(LineIndex(0));
 LPTSTR p=number.GetBuffer(len);
 this->GetLine(0,p,len);
 AfxMessageBox(number);
   得到系统目录 (GetSystemDirectory)

4: 从字符串中提取数字
 CString strNum;
 CString str("测试125各国87kk");
 strNum = GetStr(str);
 AfxMessageBox(strNum);
 
5: 创建无模对话框
 CDlg_Test *aa = new CDlg_Test;
 aa->Create(IDD_DIALOG1,NULL);
 aa->ShowWindow(SW_SHOW);

6: 得到窗口绝对坐标

 CString strNum,strNum1;
 CRect rect;
 GetClientRect(&rect);
 ClientToScreen(&rect);
 strNum.Format("X: %d",rect.top);
 strNum1.Format("   Y: %d",rect.left);
 strNum = strNum + strNum1;
 AfxMessageBox(strNum);
 
7: 复制文件夹
 SHFILEOPSTRUCT  Op;
 
 char FromBuf[]="E:\\temp\0";
 char ToBuf[]="\\\\SINTEKSERVER\\个人文档\\陈 伟\0";;
 
 Op.hwnd = NULL;
 Op.wFunc = FO_COPY;
 Op.pFrom = FromBuf;
 Op.pTo = ToBuf;
 Op.fFlags = FOF_NOCONFIRMATION | FOF_RENAMEONCOLLISION ;
 Op.fAnyOperationsAborted = FALSE;
 Op.hNameMappings = NULL;
 Op.lpszProgressTitle = NULL;
 
 if(SHFileOperation(&Op) == 0)
  MessageBox("复制完毕","提示",MB_OK|MB_ICONINFORMATION);

8: 捕获 Ctrl＋鼠标左键 组合
LRESULT CGfdsaDlg::WindowProc(UINT message, WPARAM wParam, LPARAM lParam)
{
 // TODO: Add your specialized code here and/or call the base class
 switch(message)
 {
  case WM_LBUTTONDOWN://????wParam ==
  if (wParam & MK_CONTROL)
   AfxMessageBox("bbb");
  break;
 }
 return CDialog::WindowProc(message, wParam, lParam);
}
 或
 case WM_LBUTTONDOWN:
  if(GetKeyState(VK_CONTROL)<0)
   MessageBox(hwnd,"aaa","bbb",MB_OK);
  break;